If you are using a long action why not just rebarrel it in .280 Remington and avoid all the magazine hassles, after all, the .284 Winchester was developed to duplicate the .280 performance in a short...
Liked On: 30-01-2020, 11:05 PM
Do it!!! Let me know your cast weight and il make a little stick bait for ya. 129238
Liked On: 29-01-2020, 08:34 PM
129103 Weekend just gone. He should be hard underneath, have shot them from now onwards in years previous and they were hard. I agree, think there’s going to be some good stags about this year due...
Liked On: 28-01-2020, 12:06 PM
Mixed bag from mayor this weekend. Quiet on the kingi and snapper front but heaps of everything else. Including sharks, so many sharks. Good to see pinkies there in good numbers. Was heaps of...
Liked On: 15-01-2020, 07:05 PM
The three poles make it stronger Twice as water proof as the Nautilis Larger floor area than the Minaret and the Nautilus Bigger vestibule than the Minaret and the Nautilus (3 times as big...
Liked On: 15-01-2020, 02:30 PM
I thought this was your coming out thread :P
Liked On: 15-01-2020, 02:29 PM
Hi philipo, the money for the horse magazines hasn’t cleared yet, please get back to me
Liked On: 13-01-2020, 11:03 PM
Best to ask the guys at DPT. They recommended threading my finnlight 14-1 after measuring it, I don't know how this compares to other Sako/Tikka barrels.
Liked On: 12-01-2020, 08:59 AM
Spent a couple of days up at Waikaremoana with the family. It's a truely beautiful place. Took the fly rod just in case I got a chance for a flick. Stalking with a Hamills Killer around the lake edge...
Liked On: 11-01-2020, 10:01 AM
Nothing wrong with the 6.5 Creedmoor either. Very accurate cartridge generally. For hunting deer I use the 143 ELD-X at 2800 fps with moderate pressure from a 24" barrel Tikka using AR2009 and RE16...
Liked On: 06-01-2020, 10:56 PM
Greetings 6.5, At least you have the calibre sorted. The 6.5 .284 should tick all your boxes, good cases, plenty of load data etc but it may not be what you are looking for. I sense that you may be...
Liked On: 06-01-2020, 10:54 PM
Ended up with two of these at 40", caliber specific in that one went from 22 to 6.8 and the other 7mm to .40 something which will cover me till the Custom 12.7×108mm arrives, then I'll just use the...
Liked On: 31-12-2019, 11:59 AM
You should start your own gunsmithing business, guns guns, or sighting solutions are two names that spring to mind. I could send some work your way if you thread barrels with a hand die set.
Liked On: 04-12-2019, 06:51 PM
Instead of threading barrels for suppressors I would braze them on, no worries about them coming loose.
Liked On: 04-12-2019, 06:51 PM
I knew an old fella that did this for years with a BSA 270, and a Nikko Stirling scope in PH mounts. Drove an old Series 1 Landrover everywhere, was a very capable mechanic and engineer, and instead...
Liked On: 03-12-2019, 06:55 PM