dannyb
Unapologetic gun slut

13927 Likes

Page 10 of 929 First 12345678910111213141516171819202122232460110510 ... Last

• Jump to page:

1. 
   dannyb liked post by kiwijames On thread : Repair anodizing on a scope

   I didn't mind the music but too much fucking around every morning. There no space in our bathrooms now.

   Liked On: 26-03-2025, 08:55 AM

2. 
   dannyb liked post by Brian On thread : My 22 Creedmoor is ready...

   22x06,22x284 the possibilities are endless.

   Liked On: 25-03-2025, 08:30 PM

3. 
   dannyb liked post by Sika 8 On thread : Fixed wing to Boyd strip?

   I was in there last month for a week (tussock hut) the Boyd strip is in top condition. had a couple of planes there, one husband and wife hunting / exploring & another party fishing the Ngaruroro ...

   Liked On: 25-03-2025, 09:30 AM

4. 
   dannyb liked post by Kiwi Greg On thread : My 22 Creedmoor is ready...

   I organised a 22 Creedmoor over 6 years ago now & have both neck turn & no neck turn reamers, I have built plenty so far It goes best with SRP Lapua brass & is inherently extremely accurate, sub...

   Liked On: 25-03-2025, 05:52 AM

5. 
   dannyb liked post by Tahr On thread : My 22 Creedmoor is ready...

   Collecting this tomorrow. .243 Tikka varmint re-barreled. 20" Criterion barrel. 1:7 twist. Contoured slightly heavier than standard Tikka. Currently Ive got 80grn ELDX and 80 Targex to try -...

   Liked On: 24-03-2025, 08:39 PM

6. 
   dannyb liked post by buzzmann On thread : Crown question

   So just leave it? Cheers Sent from my iPhone using Tapatalk

   Liked On: 24-03-2025, 08:10 AM

7. 
   dannyb liked post by akaroa1 On thread : Crown question

   No. The muzzle is flat. The crown, which is where the rifling leaves the barrel, is the angled section. The shape of the muzzle is largely immaterial The shape and quality of the crown is the...

   Liked On: 24-03-2025, 08:10 AM

8. 
   dannyb liked post by Tahr On thread : Thoughts on the rifle?

   I can laugh along with your over reaction to tongue in cheek humour-the tariff bit. The rest I believe to be true.

   Liked On: 23-03-2025, 09:09 PM

9. 
   dannyb liked post by Tahr On thread : Thoughts on the rifle?

   There are 2 gun threads now where people are answering a first post, not introduced, non replying post from someone saying they live in the US. Slam a tariff on them I say.

   Liked On: 23-03-2025, 09:09 PM

10. 
    dannyb liked post by Roarless20 On thread : 7mm rem magnum accuracy issue

    Check to make sure there is not pitting at the muzzle crown. Very common these days from leaving a suppressor on (even for just a multi day hunt if wet conditions)

    Liked On: 23-03-2025, 08:56 PM

11. 
    dannyb liked post by Tikka7mm08 On thread : 280AI Revisited - Forbes - Load Development

    *3.325-3.330 COAL.

    Liked On: 23-03-2025, 07:27 PM

12. 
    dannyb liked post by Pommy On thread : 7mm rem magnum accuracy issue

    Yeah and they are way more stubborn than you'd think. Difficult to get rid of without the right solvent and elbow grease. I have a borescope if you want to chuck that down it and have a look.

    Liked On: 23-03-2025, 06:59 PM

13. 
    dannyb liked post by Tikka7mm08 On thread : 280AI Revisited - Forbes - Load Development

    Above shot with the wee A-Tec brake.

    Liked On: 23-03-2025, 03:08 PM

14. 
    dannyb liked post by Tikka7mm08 On thread : 280AI Revisited - Forbes - Load Development

    61gn N560 3.225-3.330 COAL 162gn ELDM. 2 shots at 400y (slightly low) after sighting in, 2 at 600y (slightly high). Not sure my ballistics chart is bang on point but for hunting should be ok....

    Liked On: 23-03-2025, 02:55 PM

15. 
    dannyb liked post by DavidGunn On thread : Hunting fatality in BOP

    "Police 'notified' at 2am"....not quite the same thing.

    Liked On: 23-03-2025, 08:07 AM

Page 10 of 929 First 12345678910111213141516171819202122232460110510 ... Last

• Jump to page: