dannyb
Unapologetic gun slut

7503 Likes

Page 263 of 501 First ... 163213249250251252253254255256257258259260261262263264265266267268269270271272273274275276277313363 ... Last

• Jump to page:

1. 
   keengunNic liked post by dannyb On thread : Chronograph advice

   Whilst I know you have a passionate hate for chrono's, they do have their uses, knowing where your lowest ES is tells you where your best point is to find a stable consistent load. You can fluke a...

   Liked On: 07-03-2022, 09:42 PM

2. 
   janleroux liked post by dannyb On thread : Chronograph advice

   The thing about optical chrono's is they are susceptible to a lot of variables, light (lack of or abundance of it) and shooting at a slight angle across the gates are just a couple. I recently...

   Liked On: 07-03-2022, 09:20 PM

3. 
   6x47 liked post by dannyb On thread : An unbelievable turn of events !

   must've had bunji guiding you :yaeh am not durnk:

   Liked On: 07-03-2022, 07:40 PM

4. 
   turtle liked post by dannyb On thread : An unbelievable turn of events !

   must've had bunji guiding you :yaeh am not durnk:

   Liked On: 07-03-2022, 07:07 PM

5. 
   Tikka7mm08 liked post by dannyb On thread : Gun shop recommendations - Christchurch

   Gunworks like everyone else have had to increase prices due to the cost of restocking in the current market, have never found Amanda or Ronelle grumpy to deal with, I imagine they are under a lot of...

   Liked On: 07-03-2022, 06:15 PM

6. 
   7mm Rem Mag liked post by dannyb On thread : Is it the end of the road for my Z5

   223 will be fine with your little deers, I shot my first fallow with a 223, was 200 yards and bang flop result with belmont 55gn sp.

   Liked On: 07-03-2022, 08:17 AM

7. 
   Mooseman liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

   Thanks :thumbsup: its the rifle it just fits me so well its just easy for me to shoot it well. One day when the right barrel comes along I will re barrel it to a 20" 300wsm but there's no rush to do...

   Liked On: 06-03-2022, 06:45 PM

8. 
   Micky Duck liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

   Its not a need, more of a want. The eldx are good near or far :D I can get federal fusion 150gn and they would likely do just as good for a close up load.

   Liked On: 06-03-2022, 04:27 PM

9. 
   7mmsaum liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

   Well hopefully this ought to answer a few questions.... 6x 71.5gn old powder with the original load data 6x 70gn new powder with the lowest e.s from latest ladder 6x 71.5gn new powder using...

   Liked On: 06-03-2022, 03:15 PM

10. 
    7mm Rem Mag liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

    Well met up with Jock at the hand loaders range to run some loads over his labradar. First up I shot the 6 rounds i loaded with the old batch of powder. Avg speed was still down on my original load...

    Liked On: 06-03-2022, 03:12 PM

11. 
    Micky Duck liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

    Some 160gn partitions would be awesome but never seen em in the shops and they ain't bloody cheap either :yaeh am not durnk:

    Liked On: 06-03-2022, 03:11 PM

12. 
    Micky Duck liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

    Normally I like my ES to be under 20fps or preferebly single digits but in the current situation with component availability I'm not gonna tutu with this load (70gn) clearly it shoots incredibly well...

    Liked On: 06-03-2022, 03:02 PM

13. 
    Moa Hunter liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

    Well hopefully this ought to answer a few questions.... 6x 71.5gn old powder with the original load data 6x 70gn new powder with the lowest e.s from latest ladder 6x 71.5gn new powder using...

    Liked On: 06-03-2022, 02:45 PM

14. 
    Micky Duck liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

    With the 70gn load whether the cold bore caused the shot to the left of the bull or possibly shooter error (pulled) it doesn't matter the other 5 shots went through the bull :cool:

    Liked On: 06-03-2022, 02:36 PM

15. 
    Micky Duck liked post by dannyb On thread : ADI 2225 anemic compared to old batch ?

    Well met up with Jock at the hand loaders range to run some loads over his labradar. First up I shot the 6 rounds i loaded with the old batch of powder. Avg speed was still down on my original load...

    Liked On: 06-03-2022, 02:35 PM

Page 263 of 501 First ... 163213249250251252253254255256257258259260261262263264265266267268269270271272273274275276277313363 ... Last

• Jump to page: