dannyb
Unapologetic gun slut

12858 Likes

Page 4 of 858 First 12345678910111213141516171854104504 ... Last

• Jump to page:

1. 
   dannyb liked post by PerazziSC3 On thread : Mechanics

   Had the mobile brake guy around, sounds like he made some adjustments. Just need to take it in for recheck

   Liked On: 20-05-2024, 01:37 PM

2. 
   dannyb liked post by Flyblown On thread : Mechanics

   Careful, you might end up drinking the rest of the slab trying to figure out why that hasn’t worked… The early 70s FJ40 next door to me has the handbrake on the drive shaft behind the transfer case....

   Liked On: 20-05-2024, 08:59 AM

3. 
   dannyb liked post by grandpamac On thread : Where to from here with my 7WSM?

   Greetings, We have the winner, a badly damaged crown. I am amazed it shoots as well as it does. It looks like damage was done by rough handling. I have no doubt that the barrel is original to the...

   Liked On: 20-05-2024, 08:58 AM

4. 
   dannyb liked post by Dan.22-250 On thread : Where to from here with my 7WSM?

   As has been said the crown looks rough, it also appears that the rifling is damaged/not straight just inside the muzzle (about halfway down the visible part). Maybe the muzzle end of the barrel has...

   Liked On: 20-05-2024, 08:17 AM

5. 
   dannyb liked post by Blackfern On thread : Where to from here with my 7WSM?

   the rechamber itself would raise suspicion with me. get a smith to have a look. had a 280 rem years ago and the chamber looked like it had been done with a cordless drill and a masonry bit...

   Liked On: 20-05-2024, 08:16 AM

6. 
   dannyb liked post by Rhenus On thread : Jard 17wsm reviews

   Same issues with case ejection or more ? They’re base of ar platforms wouldnt though mechanically they’d be too far wrong but maybe rubbish materials ? Sent from my iPhone using Tapatalk

   Liked On: 19-05-2024, 10:56 PM

7. 
   dannyb liked post by Kiwi Greg On thread : 7-6.5PRC

   I do have a 6.5-7PRC, 156's beyond 3100fps in a 22" barrel This thread is about the 7-6.5 PRC :)

   Liked On: 19-05-2024, 05:30 PM

8. 
   dannyb liked post by chainsaw On thread : Where to from here with my 7WSM?

   2970 fps with low ES, sounds like job done. Tweak seating depth might shrink grp size a bit.

   Liked On: 18-05-2024, 05:25 PM

9. 
   dannyb liked post by 7mmsaum On thread : 223 on deer

   It works exceedingly well A deer 100-750 metres lower than a vehicle is bought to the vehicle very quickly with little effort Then carry on hunting

   Liked On: 18-05-2024, 03:45 PM

10. 
    dannyb liked post by chainsaw On thread : Where to from here with my 7WSM?

    Does it shoot other projectiles accurately? Before going to much further I’d try a simple flat base projectile, 150 - 160 gn with a proven powder in 7WSM (2213sc or 2217). Run a ladder and record...

    Liked On: 17-05-2024, 10:32 PM

11. 
    dannyb liked post by 7mmsaum On thread : 223 on deer

    You might need a winch B No more carrying anything uphill :) I have 750 metres of rope for my capstan winch 250480 250479

    Liked On: 17-05-2024, 10:29 PM

12. 
    dannyb liked post by robhughes-games On thread : The lightening project

    And the fast twist before its bead blast. One of my pinned 30moa rails too. 250420

    Liked On: 17-05-2024, 02:02 PM

13. 
    dannyb liked post by 7mmsaum On thread : Farm Stay Airbnb Shooting

    Check out “Heavenly horse treks” There’s reds and fallow as well You just pay for accomodation, no payment for the animals you shoot Wairarapa area

    Liked On: 16-05-2024, 10:40 AM

14. 
    dannyb liked post by Padox On thread : Anyone in Otago (Dunedin way) keen for a hunt?

    Bit far for a run over here pm me if you want maybe able to get a mate to take for a hunt or 2 over that way

    Liked On: 16-05-2024, 08:16 AM

15. 
    dannyb liked post by Billbob On thread : Euro mounts / skull cleaning

    Thank you dannyb pleasure to meet you too. They look great up there, but the looks you have room for more too! :thumbsup:

    Liked On: 16-05-2024, 07:36 AM

Page 4 of 858 First 12345678910111213141516171854104504 ... Last

• Jump to page: