dannyb
Unapologetic gun slut

7503 Likes

Page 466 of 501 First ... 366416452453454455456457458459460461462463464465466467468469470471472473474475476477478479480 ... Last

• Jump to page:

1. 
   veitnamcam liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   Well after multiple deep copper cleans it's finally good, no more copper on the rifling. Hopefully put some rounds down it soon. This pic might not show much but best I could do, rifling looks...

   Liked On: 02-02-2019, 07:27 AM

2. 
   Mooseman liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   Well after multiple deep copper cleans it's finally good, no more copper on the rifling. Hopefully put some rounds down it soon. This pic might not show much but best I could do, rifling looks...

   Liked On: 01-02-2019, 09:00 PM

3. 
   Flyblown liked post by dannyb On thread : 243 load advice 1:10 twist winchester mod 70

   This will do nicely, 40.1grains of 2209 seated just on the lands, every time I tried seating it off the lands the grouping opened up, its not jammed in tight just touching. Speed was 2840fps I...

   Liked On: 01-02-2019, 08:57 PM

4. 
   Sideshow liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   Got a box of 130g whitetails to run through it

   Liked On: 01-02-2019, 08:50 PM

5. 
   Bernie liked post by dannyb On thread : 243 load advice 1:10 twist winchester mod 70

   This will do nicely, 40.1grains of 2209 seated just on the lands, every time I tried seating it off the lands the grouping opened up, its not jammed in tight just touching. Speed was 2840fps I...

   Liked On: 01-02-2019, 08:06 PM

6. 
   Steelisreal liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   Well after multiple deep copper cleans it's finally good, no more copper on the rifling. Hopefully put some rounds down it soon. This pic might not show much but best I could do, rifling looks...

   Liked On: 01-02-2019, 07:24 PM

7. 
   Micky Duck liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   Got a box of 130g whitetails to run through it

   Liked On: 01-02-2019, 06:31 PM

8. 
   Moa Hunter liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   Maybe salvage was the wrong word, rescue from an eternity of sitting in the back of a safe being unused may be better, I don't intend to change the character at all. Hopefully just hunt with it...

   Liked On: 01-02-2019, 01:43 PM

9. 
   6x47 liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

   I will only be buying it if it shoots reasonably well, don't need a safe queen

   Liked On: 01-02-2019, 07:44 AM

10. 
    Micky Duck liked post by dannyb On thread : Sako finbear what's it worth and is it worth salvaging ?

    Sorry when I say salvage I would likely only get a new recoil pad (hopefully the same) and sort the trigger as its a little heavy, maybe get the barrel crowned. I will be doing some shooting to see...

    Liked On: 01-02-2019, 06:12 AM

11. 
    Double Shot liked post by dannyb On thread : Svord again..... There's something really wrong with me

    This is after 2 coats of true oil, I did one more and will leave that to dry overnight then I'll give it a quick buff. 103384 103385

    Liked On: 30-01-2019, 10:53 AM

12. 
    Double Shot liked post by dannyb On thread : Svord again..... There's something really wrong with me

    Went over the blade with a few different grades of wet and dry down to 1000grit And took the lacquer off the handle and it's come up pretty nice. I think for now some true oil and a decent sharpen...

    Liked On: 30-01-2019, 10:53 AM

13. 
    Double Shot liked post by dannyb On thread : Svord again..... There's something really wrong with me

    Well got this drop point from 257weatherby and was thinking about making a new handle from a NZ native wood. But on inspection the handle wasn't as rough as it looked in the pictures (bought sight...

    Liked On: 30-01-2019, 10:53 AM

14. 
    timattalon liked post by dannyb On thread : Share you tricks and tips.........

    Still talking wbout animals right ? :shave:

    Liked On: 28-01-2019, 08:49 PM

15. 
    csmiffy liked post by dannyb On thread : Svord again..... There's something really wrong with me

    Beeswax polished the handle and oiled the blade, the pics really don't do the gloss finish justice, also I really should've taken before pics. The blade is as shiny as its gonna be. Hopefully will...

    Liked On: 28-01-2019, 08:55 AM

Page 466 of 501 First ... 366416452453454455456457458459460461462463464465466467468469470471472473474475476477478479480 ... Last

• Jump to page: