dannyb
Unapologetic gun slut

13927 Likes

Page 75 of 929 First ... 256162636465666768697071727374757677787980818283848586878889125175575 ... Last

• Jump to page:

1. 
   dannyb liked post by gimp On thread : "Tagging" Users in posts

   Yes it gives them a notification they've been "mentioned" Just put an @ before their username. TararuaWest

   Liked On: 21-05-2024, 05:56 PM

2. 
   dannyb liked post by grandpamac On thread : .600 Nitro

   That wimpy thing. Not a patch on the 700 Nitro that came out a few years back. Regarding the 600 nitro if you have to ask how much the ammo costs you can't afford it. It fires a 900 grain projectile...

   Liked On: 21-05-2024, 03:50 PM

3. 
   dannyb liked post by Tahr On thread : Stags and Bucks 2024

   Bella and an average one just recently. He still had that musky rutting smell. 250721

   Liked On: 21-05-2024, 03:38 PM

4. 
   dannyb liked post by drunk_mexican On thread : Bergara 308 takedown loads

   45gr of 2208 behind a 165gr speer BTSP. Getting 2566 fps, ES of 14 fps over 10 shots. Photo attached from initial load development. 250675

   Liked On: 21-05-2024, 08:59 AM

5. 
   dannyb liked post by PerazziSC3 On thread : Mechanics

   Had the mobile brake guy around, sounds like he made some adjustments. Just need to take it in for recheck

   Liked On: 20-05-2024, 01:37 PM

6. 
   dannyb liked post by Flyblown On thread : Mechanics

   Careful, you might end up drinking the rest of the slab trying to figure out why that hasn’t worked… The early 70s FJ40 next door to me has the handbrake on the drive shaft behind the transfer case....

   Liked On: 20-05-2024, 08:59 AM

7. 
   dannyb liked post by grandpamac On thread : Where to from here with my 7WSM?

   Greetings, We have the winner, a badly damaged crown. I am amazed it shoots as well as it does. It looks like damage was done by rough handling. I have no doubt that the barrel is original to the...

   Liked On: 20-05-2024, 08:58 AM

8. 
   dannyb liked post by Dan.22-250 On thread : Where to from here with my 7WSM?

   As has been said the crown looks rough, it also appears that the rifling is damaged/not straight just inside the muzzle (about halfway down the visible part). Maybe the muzzle end of the barrel has...

   Liked On: 20-05-2024, 08:17 AM

9. 
   dannyb liked post by Blackfern On thread : Where to from here with my 7WSM?

   the rechamber itself would raise suspicion with me. get a smith to have a look. had a 280 rem years ago and the chamber looked like it had been done with a cordless drill and a masonry bit...

   Liked On: 20-05-2024, 08:16 AM

10. 
    dannyb liked post by Rhenus On thread : Jard 17wsm reviews

    Same issues with case ejection or more ? They’re base of ar platforms wouldnt though mechanically they’d be too far wrong but maybe rubbish materials ? Sent from my iPhone using Tapatalk

    Liked On: 19-05-2024, 10:56 PM

11. 
    dannyb liked post by Kiwi Greg On thread : 7-6.5PRC

    I do have a 6.5-7PRC, 156's beyond 3100fps in a 22" barrel This thread is about the 7-6.5 PRC :)

    Liked On: 19-05-2024, 05:30 PM

12. 
    dannyb liked post by chainsaw On thread : Where to from here with my 7WSM?

    2970 fps with low ES, sounds like job done. Tweak seating depth might shrink grp size a bit.

    Liked On: 18-05-2024, 05:25 PM

13. 
    dannyb liked post by 7mmsaum On thread : 223 on deer

    It works exceedingly well A deer 100-750 metres lower than a vehicle is bought to the vehicle very quickly with little effort Then carry on hunting

    Liked On: 18-05-2024, 03:45 PM

14. 
    dannyb liked post by chainsaw On thread : Where to from here with my 7WSM?

    Does it shoot other projectiles accurately? Before going to much further I’d try a simple flat base projectile, 150 - 160 gn with a proven powder in 7WSM (2213sc or 2217). Run a ladder and record...

    Liked On: 17-05-2024, 10:32 PM

15. 
    dannyb liked post by 7mmsaum On thread : 223 on deer

    You might need a winch B No more carrying anything uphill :) I have 750 metres of rope for my capstan winch 250480 250479

    Liked On: 17-05-2024, 10:29 PM

Page 75 of 929 First ... 256162636465666768697071727374757677787980818283848586878889125175575 ... Last

• Jump to page: