Dazzh
Member

256 Likes

Page 17 of 18 First ... 3456789101112131415161718 Last

• Jump to page:

1. 
   Dazzh liked post by scotty On thread : Problematic 6mm Remington

   you have hair to pull out????? not a commodity to be playing loose and free with best to leave it where it is or one day you will look in the mirror and see homer simpson......

   Liked On: 14-04-2022, 09:55 PM

2. 
   Dazzh liked post by grandpamac On thread : Problematic 6mm Remington

   Greetings, Something not mentioned is one of the action screws bottoming out before the action is fully bedded in the stock. This could be the screws being too long or the threaded portion is too...

   Liked On: 14-04-2022, 08:44 AM

3. 
   Dazzh liked post by Joe_90 On thread : Barrels and Accuracy

   Some guesses that could effect accuracy after a barrel chop, 1) Harmonics of the whole system has changed. With the shorter barrel the projectile may be exiting when the barrel is at a different...

   Liked On: 12-04-2022, 10:09 PM

4. 
   Dazzh liked post by Taupohunter On thread : 3 vs 5 shot groups

   Three shots test the load. Five shots test the shooter. Not many shoots can consistently hold the same shoulder pressure in a hunting rifle for 5 shots.

   Liked On: 07-04-2022, 09:57 PM

5. 
   Dazzh liked post by Ross Nolan On thread : 3 vs 5 shot groups

   I find the best use of a 3 shot group is to identify loads during development that aren't any good. Tight 3 shot groups may ( probably will) expand when turned into statistically useful 10 shot...

   Liked On: 07-04-2022, 09:55 PM

6. 
   Dazzh liked post by Hunter_Nick On thread : What does your suppressed huntimg rifle weigh?

   Heaviest mini action ever made: BSA Hunter action, Sako takeoff .243 barrel chambered in 6x45, VX3i 2.5-8, custom 8” long gunworks can and home made fibreglass stock. 3.6kg. So much excess metal...

   Liked On: 04-04-2022, 11:53 AM

7. 
   Dazzh liked post by ebf On thread : Getting the most out of a 308.

   righto, so some "random" comments. You seem to have settled on a 26 inch barrel. Hopefully a 1:10 twist - that gives you a nice spread from 150gr all the way up to 230gr. The one suggestion...

   Liked On: 02-04-2022, 01:40 PM

8. 
   Dazzh liked post by ebf On thread : Getting the most out of a 308.

   I ask again, what is the specific issue ? Are you looking for a particular speed that is not achievable with a 16 inch barrel ? "Optimal" is a question of opinion. Probably 22 to 24 inch if...

   Liked On: 02-04-2022, 07:00 AM

9. 
   Dazzh liked post by hey On thread : neck tension

   2 or 3 thou is what I usually do. Not sure about pull them out, it also depends on how deep you seat the projectile. Usually you can feel when neck tension is too much, when you have to force the...

   Liked On: 26-03-2022, 03:57 PM

10. 
    Dazzh liked post by Ryan_Songhurst On thread : Nx8 2.5-20 first thoughts

    Not to detract from the fact that these are a beautiful bit of kit but I think we have a propensity in nz to overscope the crap out of our rifles and the lightweight rifle so you can run a...

    Liked On: 23-03-2022, 07:01 AM

11. 
    Dazzh liked post by Trout On thread : New Tikka .308 zeroing issues

    JJ I see you live on the island below me some where,i guess within 3hrs drive.if you want to try something different, PM me.Come up my way and we will go try yr tikka at the range,pretty much the...

    Liked On: 09-03-2022, 04:34 PM

12. 
    Dazzh liked post by rossi.45 On thread : New Tikka .308 zeroing issues

    allowing the rifle to free recoil without holding the forend just seems so wrong to me . . it can work but a natural hold and follow thru i see as good repeatable techneque. what i find...

    Liked On: 09-03-2022, 04:32 PM

13. 
    Dazzh liked post by grandpamac On thread : New Tikka .308 zeroing issues

    Greetings JimmyJames and all, Reading through some of the responces and looking at what could only generously called groups it strikes me that something serious is out of whack. The fact you managed...

    Liked On: 09-03-2022, 04:29 PM

14. 
    Dazzh liked post by Woody On thread : New Tikka .308 zeroing issues

    Does' nt make any logical sense that it groups under 1moa at 100 ; thus meeting warrenty; but shoots wildly at 200. . There is another "remote" possibility, as follows:-- If tbe aiming mark is...

    Liked On: 09-03-2022, 04:23 PM

15. 
    Dazzh liked post by zimmer On thread : What to make of weird chrony data?

    chrony was only about a metre from the muzzle due to the topography I'm surprised at that distance the muzzle blast didn't disturb the chronograph, even with a medium capacity round. And muzzle...

    Liked On: 08-03-2022, 09:18 PM

Page 17 of 18 First ... 3456789101112131415161718 Last

• Jump to page: