Deanohit
Member

867 Likes

Page 47 of 58 First ... 3334353637383940414243444546474849505152535455565758 Last

• Jump to page:

1. 
   Deanohit liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   Well seeing as you asked nicely john worthington its all done. I’m just waiting to get some metalwork back from Allen Carr after being blued, and it’ll be ready to ho to a new home. Couple of photos:...

   Liked On: 09-09-2024, 01:14 PM

2. 
   Deanohit liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   Sanding completed, and first coat of sealer applied. Can now see the contrast and true colour of this piece. There are a few highlights lurking in the wood, which will show up nicely once all the...

   Liked On: 09-09-2024, 01:13 PM

3. 
   Deanohit liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   Getting close now. Hopefully just another hour or so of sanding and then we get to really see the grain when the sealer goes on 196199

   Liked On: 09-09-2024, 01:13 PM

4. 
   Deanohit liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   Completion So, here it is. Completed and ready to hit the hill and do what it was made for! 189655 189656 189657 189658 189659 189660

   Liked On: 09-09-2024, 01:10 PM

5. 
   Deanohit liked post by Allgood On thread : The ‘controversial.222’

   I should add, my go to rifle was my Sako Vixen in 222..........till I got my Howa in 204. For fallow it is a tossup which one I pull out of the gunsafe. Some of you might not agree with my...

   Liked On: 09-09-2024, 12:26 PM

6. 
   Deanohit liked post by longshot On thread : A question on your shooting using nv techniques

   I run mine with white as hot, black as cold. That way it isn't so bright to look at in the night.

   Liked On: 09-09-2024, 09:53 AM

7. 
   Deanohit liked post by longshot On thread : A question on your shooting using nv techniques

   I adjust the brightness and contrast on mine at the start of every hunt. Find an outside animal (dog or cat is good) that you can look at to make sure the settings are suitable for the conditions. ...

   Liked On: 09-09-2024, 09:52 AM

8. 
   Deanohit liked post by woods223 On thread : A question on your shooting using nv techniques

   I use a handheld thermal spotter and NV scope on dedicated 223 mostly, sometimes use green led torch mounted on my daytime 223 if that’s what I have with me. Scan with thermal and if animals are...

   Liked On: 09-09-2024, 09:47 AM

9. 
   Deanohit liked post by XR500 On thread : A question on your shooting using nv techniques

   ....and covered in 'mines' that can whip your feet out from under you in the blink of an eye!

   Liked On: 09-09-2024, 09:35 AM

10. 
    Deanohit liked post by ojc2 On thread : Gun Porn, show off your new toys

    My latest build, got sick of lugging the light but very long Waypoint 6.5prc through thick bush so finally got round to completing a project I'd hand in mind (and safe) for the last couple of years....

    Liked On: 09-09-2024, 09:28 AM

11. 
    Deanohit liked post by Hermitage On thread : Advice: strange call from a logistics company after AliExpress delivery

    :wtfsmilie: The OP ordered some firearm-related items from AliExpress - he's not involved in a romance scam with some dude from Nigeria. Your post does remind me of the time a scammer called my...

    Liked On: 06-09-2024, 09:42 PM

12. 
    Deanohit liked post by Tahr On thread : 223 on deer

    3 last evening. All around 250 yds. 60grn Hammer Hunter. 258604 258605 258606

    Liked On: 06-09-2024, 09:19 PM

13. 
    Deanohit liked post by littlemorepork On thread : Good, affordable, small knife

    Keep it dry at all times. once the handle swells, they are difficult to open. I put a droppoint on mine. Suits me better.241904

    Liked On: 05-09-2024, 08:55 AM

14. 
    Deanohit liked post by scotty On thread : A heads up

    cant like this .... going thru something similar myself ...... without going into it too much he will get a call from the FSA , maybe not for a few months he needs to be proactive because the...

    Liked On: 03-09-2024, 10:17 AM

15. 
    Deanohit liked post by Husky1600#2 On thread : .22 project

    I'd be checking the bore before starting on any externals. Give it a good scrub with a brush and solvent and make sure it aint gone as rusty as the outside.

    Liked On: 03-09-2024, 10:15 AM

Page 47 of 58 First ... 3334353637383940414243444546474849505152535455565758 Last

• Jump to page: