I have a Rossi in 357 mag I load for .A 160grain semi wadcutter driven by 6.3 grains of unique groups about 3 inches at 100m. Very pleased with it.
Liked On: 30-01-2021, 04:51 PM
When I first started shooting heavy cast bullets 50 odd years ago The only powder data I had was IMR4064 and H4350 using 220 grain. The loads I tried were 40grains IMR4064 and 42 grains H4350....
Liked On: 25-11-2020, 09:53 PM
I am occasionally using some AR2201 I bought from Din about 50 years ago and it still seems the same. I havent checked it in the last 5 months but dont think it has deteriorated.
Liked On: 17-11-2020, 07:32 PM
I think if you put up a decent antenna you will get quite a few radio stations.A 20 foot whip should pull in FM from a distance and a couple of wraps around radio will bring in AM .
Liked On: 10-10-2020, 08:37 AM
I think if you put up a decent antenna you will get quite a few radio stations.A 20 foot whip should pull in FM from a distance and a couple of wraps around radio will bring in AM .
Liked On: 09-10-2020, 08:26 PM
I think if you put up a decent antenna you will get quite a few radio stations.A 20 foot whip should pull in FM from a distance and a couple of wraps around radio will bring in AM .
Liked On: 05-10-2020, 01:30 PM
Every fault you have described sound like poor cleaning.
Liked On: 15-08-2020, 12:14 PM
If you powder coat your cast bullets you will get no leading
Liked On: 14-08-2020, 02:27 PM
Every fault you have described sound like poor cleaning.
Liked On: 13-08-2020, 09:28 AM
Every fault you have described sound like poor cleaning.
Liked On: 12-08-2020, 11:29 PM
Every fault you have described sound like poor cleaning.
Liked On: 11-08-2020, 06:44 PM
Every fault you have described sound like poor cleaning.
Liked On: 11-08-2020, 02:27 PM
Terry Pratchett?
Liked On: 04-08-2020, 01:14 PM
I cast for 9mm, 38 /357. 44mag, 45acp.32s&w,303brit,308,7.62x39. I have molds for many others I don't cast for with over 50molds in my collection and have been casting for 51 years. Havent bought a...
Liked On: 22-04-2020, 10:26 PM
I cast for 9mm, 38 /357. 44mag, 45acp.32s&w,303brit,308,7.62x39. I have molds for many others I don't cast for with over 50molds in my collection and have been casting for 51 years. Havent bought a...
Liked On: 22-04-2020, 12:05 PM