ebf
Mushroom juice ! Hic !

3737 Likes

Page 95 of 250 First ... 4581828384858687888990919293949596979899100101102103104105106107108109145195 ... Last

• Jump to page:

1. 
   Cyclops liked post by ebf On thread : QuickLOAD just arrived!

   have a yarn to puffin on here be afraid, be VERY afraid :thumbsup:

   Liked On: 05-06-2019, 07:33 PM

2. 
   Tikka7mm08 liked post by ebf On thread : MTN Stick - Extendable Walking/Ice Axe Combo

   96cm is a pretty short walking pole... I also wonder how solid it would be as a walking stick at full extension... personally I think you'd be better off with Kahtoola microsipkes and a genuine...

   Liked On: 04-06-2019, 08:40 PM

3. 
   rewa liked post by ebf On thread : Show us your DIY gunsmithing jobs

   Quick little job on a cold wet afternoon. Recently picked up a Weaver V3 1-3x20 on here. It has coin slot type turrets, and I never seem to have coins with me... Measured the radius and width...

   Liked On: 04-06-2019, 08:04 PM

4. 
   tetawa liked post by ebf On thread : Tramper missing in Tararuas

   well below zero on the tops... in winter you can get ice down to 800/900m if you factor in wind-chill it is a grim place to be. common to have 50 to 80 kmh wind in exposed places

   Liked On: 04-06-2019, 07:55 PM

5. 
   Micky Duck liked post by ebf On thread : Show us your DIY gunsmithing jobs

   Quick little job on a cold wet afternoon. Recently picked up a Weaver V3 1-3x20 on here. It has coin slot type turrets, and I never seem to have coins with me... Measured the radius and width...

   Liked On: 04-06-2019, 05:48 PM

6. 
   Beaker liked post by ebf On thread : Show us your DIY gunsmithing jobs

   Quick little job on a cold wet afternoon. Recently picked up a Weaver V3 1-3x20 on here. It has coin slot type turrets, and I never seem to have coins with me... Measured the radius and width...

   Liked On: 03-06-2019, 05:34 PM

7. 
   bigbear liked post by ebf On thread : Tramper missing in Tararuas

   https://www.stuff.co.nz/national/113194756/man-missing-in-tararua-ranges How on earth anyone would think it was ok to attempt the northern crossing during the weather we've had since Thu night is...

   Liked On: 03-06-2019, 09:43 AM

8. 
   40mm liked post by ebf On thread : Show us your DIY gunsmithing jobs

   Quick little job on a cold wet afternoon. Recently picked up a Weaver V3 1-3x20 on here. It has coin slot type turrets, and I never seem to have coins with me... Measured the radius and width...

   Liked On: 03-06-2019, 09:27 AM

9. 
   Marty Henry liked post by ebf On thread : Oh Bother!

   use a pick to rough up the inside of the remaining part of the case epoxy putty from the bottom end, then tap out from top with a drift once it has set. if that does not work, drill and tap the...

   Liked On: 02-06-2019, 05:09 PM

10. 
    rewa liked post by ebf On thread : Oh Bother!

    use a pick to rough up the inside of the remaining part of the case epoxy putty from the bottom end, then tap out from top with a drift once it has set. if that does not work, drill and tap the...

    Liked On: 02-06-2019, 02:08 PM

11. 
    LBD liked post by ebf On thread : Oh Bother!

    use a pick to rough up the inside of the remaining part of the case epoxy putty from the bottom end, then tap out from top with a drift once it has set. if that does not work, drill and tap the...

    Liked On: 02-06-2019, 02:04 PM

12. 
    bigbear liked post by ebf On thread : 600M GUN

    What is he trying to kill ? Bull thar at 600 is very different from fallow at 600... You want enough energy at the far end. So something like a 30-06 with heavy projectiles or one of the common...

    Liked On: 02-06-2019, 10:01 AM

13. 
    40mm liked post by ebf On thread : 600M GUN

    What is he trying to kill ? Bull thar at 600 is very different from fallow at 600... You want enough energy at the far end. So something like a 30-06 with heavy projectiles or one of the common...

    Liked On: 02-06-2019, 09:22 AM

14. 
    veitnamcam liked post by ebf On thread : Drill grinding weirdness

    Hey veitnamcam, so I ground it "normally" the thing looks bloody weird, but did some test cuts like you suggested. Works fine :thumbsup: Drilled a 5/16th pilot hole, and then used the now stubby...

    Liked On: 01-06-2019, 06:58 PM

15. 
    FRST liked post by ebf On thread : Hut maintenance/upgrades lower North Is. needed?

    Mangatoetoe in Aorangi could do with a chimney clean :D Most of the Tararua ones I've been to over the last 6 months (Field, Powell, Atiwhakatu, Tutuwai, Totara Flats) have been in pretty good...

    Liked On: 01-06-2019, 09:37 AM

Page 95 of 250 First ... 4581828384858687888990919293949596979899100101102103104105106107108109145195 ... Last

• Jump to page: