a small socket from your socket set makes a handy spacer for the bolt to pull the case back in to
Liked On: 26-08-2024, 01:37 PM
The wheels of good governance rotate very slowly. be patient
Liked On: 26-08-2024, 12:35 PM
The wheels of good governance rotate very slowly. be patient
Liked On: 26-08-2024, 11:11 AM
We have all seen them , laughed at them , been amazed at how well they can shoot , or how badly they can shoot . But there is very little information on the background to the rifles. Here is an...
Liked On: 26-08-2024, 11:04 AM
If not worried about the safe itself - a disc grinder through the side or back would be just fine . The front will be an arse to cut into , and the sides are probably only 3 mm steel anyway. Thats...
Liked On: 25-08-2024, 11:19 PM
I bought my first JW15 new back in 1987 . Unboxed it , stripped the ugly finish off the stock , oil finished it , fitted a fixed power 6X Tasco scope , fitted a Silent-kill slip-on suppressor , and...
Liked On: 25-08-2024, 06:30 PM
I bought my first JW15 new back in 1987 . Unboxed it , stripped the ugly finish off the stock , oil finished it , fitted a fixed power 6X Tasco scope , fitted a Silent-kill slip-on suppressor , and...
Liked On: 25-08-2024, 06:25 PM
a small socket from your socket set makes a handy spacer for the bolt to pull the case back in to
Liked On: 25-08-2024, 04:31 PM
We have all seen them , laughed at them , been amazed at how well they can shoot , or how badly they can shoot . But there is very little information on the background to the rifles. Here is an...
Liked On: 25-08-2024, 04:28 PM
We have all seen them , laughed at them , been amazed at how well they can shoot , or how badly they can shoot . But there is very little information on the background to the rifles. Here is an...
Liked On: 25-08-2024, 10:56 AM
If not worried about the safe itself - a disc grinder through the side or back would be just fine . The front will be an arse to cut into , and the sides are probably only 3 mm steel anyway. Thats...
Liked On: 24-08-2024, 08:19 PM
If not worried about the safe itself - a disc grinder through the side or back would be just fine . The front will be an arse to cut into , and the sides are probably only 3 mm steel anyway. Thats...
Liked On: 24-08-2024, 04:13 PM
You really expected effort from the story tellers? Didnt the last seven years teach you anything about the poor nature of journalism and owned media in this country.
Liked On: 21-08-2024, 04:33 PM
You really expected effort from the story tellers? Didnt the last seven years teach you anything about the poor nature of journalism and owned media in this country.
Liked On: 21-08-2024, 04:06 AM
You really expected effort from the story tellers? Didnt the last seven years teach you anything about the poor nature of journalism and owned media in this country.
Liked On: 20-08-2024, 08:17 PM