Do you need an accurate rifle or do you need brand snobbery. The budget for accurate is potentially modest , not so for the latter
Liked On: 14-11-2024, 06:13 PM
Which is why open discussion should be had
Liked On: 13-11-2024, 08:29 AM
A sympathetic restoration or a modern make-over? Remember - its only original till you change something , then it ceases to be Grandads original knife.....
Liked On: 12-11-2024, 06:53 PM
A sympathetic restoration or a modern make-over? Remember - its only original till you change something , then it ceases to be Grandads original knife.....
Liked On: 12-11-2024, 05:13 PM
Which is why open discussion should be had
Liked On: 12-11-2024, 02:15 PM
Which is why open discussion should be had
Liked On: 12-11-2024, 12:43 PM
Which is why open discussion should be had
Liked On: 12-11-2024, 12:37 PM
Which is why open discussion should be had
Liked On: 12-11-2024, 12:36 PM
It is a very bad thing for the small sole-trader gun shops. The equivalent of the Warehouse coming to your small town and destroying all the small shops
Liked On: 04-11-2024, 08:31 PM
All the sizing / seating force is applied on the up stroke so it wont make any differance. Unless you get that stuck case. As you found...
Liked On: 31-10-2024, 05:10 AM
Stick with subs or standard velocity ammo and it should last for ever
Liked On: 29-10-2024, 05:25 PM
262010 262011 262012 262013
Liked On: 29-10-2024, 07:33 AM
A drift punch is the better way to do it. An extra pair of hands to prevent the spring tension launching parts in to the future is always helpful
Liked On: 27-10-2024, 07:44 AM
They feed them to the alligators in the swamps around New Orleans
Liked On: 19-10-2024, 02:56 PM
If you want to use a timber shield as a backing - old oak bedheads and footboards are a cheap and easy source of timber and have nice grain.
Liked On: 11-10-2024, 07:37 AM