Floundering Around
Member

121 Likes

Page 4 of 9 First 123456789 Last

• Jump to page:

1. 
   Floundering Around liked post by cb14 On thread : Gone with the wind: Sleeping Mat recommendation

   I have a few expeds and they have been great. I buy them from bivouac in Wellington when they are on sale. https://www.bivouac.co.nz/gear/camping-and-tramping/sleeping-mats/exped.html

   Liked On: 10-01-2024, 08:56 PM

2. 
   Floundering Around liked post by Rn-85 On thread : Gone with the wind: Sleeping Mat recommendation

   I also have a Nemo. It's thick and warm but it's a big unit, its more comfortablethan my own bed. I have the cosmo, I think there are more compact models. Sent from my SM-G780G using Tapatalk

   Liked On: 09-01-2024, 10:55 PM

3. 
   Floundering Around liked post by Chur Bay On thread : Gone with the wind: Sleeping Mat recommendation

   I have a Nemo. Look for fabric thickness

   Liked On: 09-01-2024, 10:55 PM

4. 
   Floundering Around liked post by Jaco Goosen On thread : Tidying up my Tikka M695

   Darn....the bolt is on the right side too! Good job mate

   Liked On: 09-01-2024, 10:52 PM

5. 
   Floundering Around liked post by SikaHuntaa On thread : Gone with the wind: Sleeping Mat recommendation

   The Expeds are bloody awesome bang for your buck at the weight range. I have the Dura 6R for chopper trips when I want insane luxury- the standard Ultra series are bloody good- 5R is probably ideal...

   Liked On: 09-01-2024, 10:09 PM

6. 
   Floundering Around liked post by ZQLewis On thread : Gone with the wind: Sleeping Mat recommendation

   I use an exped down mate. Dura 6R https://www.bivouac.co.nz/gear/camping-and-tramping/sleeping-mats/exped-dura-6r-sleeping-mats.html They were about $278 last week when a mate was looking after...

   Liked On: 09-01-2024, 08:55 PM

7. 
   Floundering Around liked post by RUMPY On thread : Gone with the wind: Sleeping Mat recommendation

   I'm running an Exped synmat 7 winter. Fairly warm, about 600g, has inflation bag with it. Got mine on sale for $182 a couple of years ago.

   Liked On: 09-01-2024, 08:54 PM

8. 
   Floundering Around liked post by Brakelie On thread : Gone with the wind: Sleeping Mat recommendation

   After 23 years (it had a pretty easy life) my old Thermarest guidelite finally failed so I looked into all the options. I ended up with a Rab Stratosphere 4 from Hyperride with 25% off boxing day...

   Liked On: 09-01-2024, 08:54 PM

9. 
   Floundering Around liked post by wtd On thread : How far away was the last deer you shot???

   9m Whitetail on Rakiura.

   Liked On: 20-12-2023, 11:54 AM

10. 
    Floundering Around liked post by EmpireSafaris On thread : She’s back

    Yes Cerakote colour called graphite

    Liked On: 19-12-2023, 10:51 AM

11. 
    Floundering Around liked post by EmpireSafaris On thread : She’s back

    Tikka 590 in 243 I’ve owned for 30 years with a new Tikka T3 barrel, new cerakote finish and new scope, thanks to team at Hamills Tauranga https://i.postimg.cc/gJ8Gzwhw/IMG-2815.jpg...

    Liked On: 18-12-2023, 12:50 PM

12. 
    Floundering Around liked post by Micky Duck On thread : headtorch help

    I got given a really simple fenix head torch from landsar...far and away the best bit of kit ever...takes 1 single AA battery that is housed inside tube body of torch...one single led, 3 modes all...

    Liked On: 15-12-2023, 08:27 AM

13. 
    Floundering Around liked post by johnd On thread : Increasing case neck tension

    Be cautious if you anneal and then run them into a Lee collett die, you can get collapsed necks as the soft brass you have created sticks to the mandrel and turns the case neck inside out. Ask me how...

    Liked On: 13-12-2023, 04:20 PM

14. 
    Floundering Around liked post by zimmer On thread : Increasing case neck tension

    I think Lee say something like 50lb on the press handle. How do you judge that evrevery y time? So I just set my collet dies so the press cams over and of course do the 2 sides thing. This gives...

    Liked On: 11-12-2023, 02:32 PM

15. 
    Floundering Around liked post by TeRei On thread : Increasing case neck tension

    Anneal and throw away your expander. Heresy but it bloody works. FLS.

    Liked On: 11-12-2023, 07:23 AM

Page 4 of 9 First 123456789 Last

• Jump to page: