Friwi
Member

2311 Likes

Page 119 of 155 First ... 1969105106107108109110111112113114115116117118119120121122123124125126127128129130131132133 ... Last

• Jump to page:

1. 
   tetawa liked post by Friwi On thread : fluted barrels

   Fluting a barrel is like putting mag wheels on your car.

   Liked On: 15-03-2017, 07:36 PM

2. 
   veitnamcam liked post by Friwi On thread : fluted barrels

   Fluting a barrel is like putting mag wheels on your car.

   Liked On: 14-03-2017, 10:02 PM

3. 
   7mmsaum liked post by Friwi On thread : Sako Carbonlights ( part II )

   I took several apart and the bedding is already done during the mouldings of the carbon so there is no need to touch them or mock around. Very tight and stable bedding.

   Liked On: 03-03-2017, 12:03 PM

4. 
   veitnamcam liked post by Friwi On thread : I have a cunning plan

   7.7 grain into the exact same barrel but 17" long. It seems that the longer the barrel, the more powder you need to overcome the friction.( not mentioning all kind of bore dimensions going from...

   Liked On: 02-03-2017, 11:08 PM

5. 
   Pengy liked post by Friwi On thread : I have a cunning plan

   7.7 grain into the exact same barrel but 17" long. It seems that the longer the barrel, the more powder you need to overcome the friction.( not mentioning all kind of bore dimensions going from...

   Liked On: 02-03-2017, 10:37 PM

6. 
   veitnamcam liked post by Friwi On thread : Gun Porn, show off your new toys

   Yep, where is the 9.3 terminator reamer design up to? :-)

   Liked On: 01-03-2017, 10:21 PM

7. 
   Ryan_Songhurst liked post by Friwi On thread : Gun Porn, show off your new toys

   At least the gun won't get shot during the roar :-)

   Liked On: 26-02-2017, 01:07 AM

8. 
   Skatieguy liked post by Friwi On thread : Innovative Gunsmith Wanted?

   Hi Ljp, As I followed a similar path 15 years ago with my dreming expectations not matched ,I have Just a few suggestions regarding your built: Once you found your gunsmith . -Make sure that the...

   Liked On: 25-02-2017, 08:58 AM

9. 
   tikka liked post by Friwi On thread : Innovative Gunsmith Wanted?

   Hi Ljp, As I followed a similar path 15 years ago with my dreming expectations not matched ,I have Just a few suggestions regarding your built: Once you found your gunsmith . -Make sure that the...

   Liked On: 24-02-2017, 11:52 AM

10. 
    shooternz liked post by Friwi On thread : Innovative Gunsmith Wanted?

    Hi Ljp, As I followed a similar path 15 years ago with my dreming expectations not matched ,I have Just a few suggestions regarding your built: Once you found your gunsmith . -Make sure that the...

    Liked On: 24-02-2017, 10:33 AM

11. 
    mikee liked post by Friwi On thread : Innovative Gunsmith Wanted?

    Hi Ljp, As I followed a similar path 15 years ago with my dreming expectations not matched ,I have Just a few suggestions regarding your built: Once you found your gunsmith . -Make sure that the...

    Liked On: 24-02-2017, 07:26 AM

12. 
    rossi.45 liked post by Friwi On thread : Innovative Gunsmith Wanted?

    Hi Ljp, As I followed a similar path 15 years ago with my dreming expectations not matched ,I have Just a few suggestions regarding your built: Once you found your gunsmith . -Make sure that the...

    Liked On: 24-02-2017, 07:07 AM

13. 
    Micky Duck liked post by Friwi On thread : SECTIONAL DENSITY

    Penetration does not neccessaraly kill. I have witnessed that a few times and penetration of the same 220 gr as the 30-06 above at sub speed is vastly superior to what is does at supersonic speed....

    Liked On: 23-02-2017, 06:53 PM

14. 
    gadgetman liked post by Friwi On thread : SECTIONAL DENSITY

    Penetration does not neccessaraly kill. I have witnessed that a few times and penetration of the same 220 gr as the 30-06 above at sub speed is vastly superior to what is does at supersonic speed....

    Liked On: 22-02-2017, 10:04 PM

15. 
    veitnamcam liked post by Friwi On thread : SECTIONAL DENSITY

    You can only compare the sd of bullet of the same construction, shape , and material and material hardness . A soft lead bullet of the same general shape and weight / caliber as its jacketed hard...

    Liked On: 21-02-2017, 10:31 PM

Page 119 of 155 First ... 1969105106107108109110111112113114115116117118119120121122123124125126127128129130131132133 ... Last

• Jump to page: