Friwi
Member

2642 Likes

Page 18 of 177 First ... 456789101112131415161718192021222324252627282930313268118 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Friwi On thread : ELD-X - 308 - Bush Hunting

   Do you reload or do you shoot factory stuff only? If you reload ,Go from 178eldx to 178 eldm. Or 170 gr flatnose or 180 round nose. If factory , go down in weight , as recommended above from 150...

   Liked On: 30-09-2024, 09:00 PM

2. 
   Forestry liked post by Friwi On thread : Dreams are free - Ideal do it all riflescope for NZ

   The ideal scope would be something like a 2.5 to 10. Or something like the March 1.5 to 15 but with a 30 mm tube in first focal plane instead of 34mm tube. Also if Swarovski could have done their old...

   Liked On: 28-09-2024, 02:08 PM

3. 
   Micky Duck liked post by Friwi On thread : Barrel threading

   I like barrels that have enough meat to do a 14x1 thread at least . But it does not always happen how I want. I once fitted a brake with 1/2-28 thread on a 300 win mag savage that the customers said...

   Liked On: 24-09-2024, 11:59 PM

4. 
   Fssprecision liked post by Friwi On thread : Barrel threading

   I like barrels that have enough meat to do a 14x1 thread at least . But it does not always happen how I want. I once fitted a brake with 1/2-28 thread on a 300 win mag savage that the customers said...

   Liked On: 23-09-2024, 09:26 AM

5. 
   Micky Duck liked post by Friwi On thread : Super Slo mo 600000 frames per second projectiles leaving muzzle

   There might be more to it ( holding the fore end) than just that. Why don’t we see the muzzle or barrel vibration in those videos when we know very well that they do exist?

   Liked On: 21-09-2024, 12:11 PM

6. 
   Micky Duck liked post by Friwi On thread : Bush rifles

   Yet, it is kiwi reviving the concept and making probably one of the best reproduction currently available worldwide: ...

   Liked On: 19-09-2024, 08:43 PM

7. 
   Husky1600#2 liked post by Friwi On thread : Swarovski scope with swarovski rail mount on tikka

   Recknagel.com or .de will have the mount you are after

   Liked On: 16-09-2024, 09:24 PM

8. 
   Basenjiboy liked post by Friwi On thread : Ideas

   22-250 fast twist / long throat or 338 federal.

   Liked On: 15-09-2024, 06:58 PM

9. 
   Micky Duck liked post by Friwi On thread : Remington Alpha 1 ,who has seen one ,got one?

   Yes I had one in my hands. It is how a proper rifle should be built. The bolt with its 1/4 turn firing pin disassembly is an improvement . I don’t like how the for end tip finishes on the stock ,...

   Liked On: 14-09-2024, 02:23 PM

10. 
    Cowboy liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 10:22 PM

11. 
    ZQLewis liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 08:14 PM

12. 
    7mil08 liked post by Friwi On thread : 280AI Revisited - Forbes - Load Development

    One very simple way, ( found by an Australian I believe!), is revert your two pins so that actually the flats are facing each other’s , it will tell you straight away if there is a mis alignement and...

    Liked On: 13-09-2024, 07:02 PM

13. 
    Micky Duck liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 11:20 AM

14. 
    csmiffy liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 10:26 AM

15. 
    tetawa liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 07:05 AM

Page 18 of 177 First ... 456789101112131415161718192021222324252627282930313268118 ... Last

• Jump to page: