Friwi
Member

2642 Likes

Page 76 of 177 First ... 266263646566676869707172737475767778798081828384858687888990126176 ... Last

• Jump to page:

1. 
   veitnamcam liked post by Friwi On thread : threading odd muzzle

   If I was doing it, I would have the last 6cm of barrel bore indicated perfectly concentric in the lathe and then all the work would be single point cut . The outside profile of those barrels not...

   Liked On: 22-08-2021, 09:38 PM

2. 
   Micky Duck liked post by Friwi On thread : threading odd muzzle

   If I was doing it, I would have the last 6cm of barrel bore indicated perfectly concentric in the lathe and then all the work would be single point cut . The outside profile of those barrels not...

   Liked On: 22-08-2021, 08:30 PM

3. 
   veitnamcam liked post by Friwi On thread : threading odd muzzle

   @ 303, when we re open after the lockdown, bring your rifle along at our workshop at dpt and I can take measurements and see what we can do for you.

   Liked On: 21-08-2021, 06:07 PM

4. 
   Three O'Three liked post by Friwi On thread : threading odd muzzle

   @ 303, when we re open after the lockdown, bring your rifle along at our workshop at dpt and I can take measurements and see what we can do for you.

   Liked On: 21-08-2021, 12:03 AM

5. 
   Marty Henry liked post by Friwi On thread : threading odd muzzle

   @ 303, when we re open after the lockdown, bring your rifle along at our workshop at dpt and I can take measurements and see what we can do for you.

   Liked On: 20-08-2021, 10:12 PM

6. 
   Micky Duck liked post by Friwi On thread : threading odd muzzle

   @ 303, when we re open after the lockdown, bring your rifle along at our workshop at dpt and I can take measurements and see what we can do for you.

   Liked On: 20-08-2021, 09:04 PM

7. 
   Micky Duck liked post by Friwi On thread : Good lightweight suppressors?

   No.The standard overbarrel suppressor is fine with the 6.5 prc.

   Liked On: 16-08-2021, 10:01 PM

8. 
   rewa liked post by Friwi On thread : Off road tyres failed warrant of fitness

   One of the two local jeep here in the tron: 174667

   Liked On: 10-08-2021, 02:22 PM

9. 
   veitnamcam liked post by Friwi On thread : Off road tyres failed warrant of fitness

   One of the two local jeep here in the tron: 174667

   Liked On: 10-08-2021, 07:38 AM

10. 
    veitnamcam liked post by Friwi On thread : .308 ammo for Sika, Sako powerhead 2, federal fusion or browning bxc

    Yep the Sako 123 gr work very well. My cousin in Scotland shoots all his deer ( roe, red and fallow) with them and supply all the local gamekeeper with them. Belmont ammunition used to make an...

    Liked On: 25-07-2021, 01:45 PM

11. 
    Shelley liked post by Friwi On thread : Show me your knives

    I have been banging on some steel Sunday . It will be a slow process: The same square piece of 1084 I started with: 172049 Beginning of a clean up: 172050

    Liked On: 13-07-2021, 08:37 PM

12. 
    ebf liked post by Friwi On thread : Show me your knives

    After a bit of filing : 172184

    Liked On: 08-07-2021, 08:37 PM

13. 
    viper liked post by Friwi On thread : Show me your knives

    I have been banging on some steel Sunday . It will be a slow process: The same square piece of 1084 I started with: 172049 Beginning of a clean up: 172050

    Liked On: 07-07-2021, 11:32 AM

14. 
    Nick-D liked post by Friwi On thread : Show me your knives

    I have been banging on some steel Sunday . It will be a slow process: The same square piece of 1084 I started with: 172049 Beginning of a clean up: 172050

    Liked On: 06-07-2021, 11:44 PM

15. 
    buzzman liked post by Friwi On thread : Sako s20

    The S20 has a heavier profile than your standard Sako or tikka. It is actually almost the same profile as the new tikka Veil, with its 5/8-24 thread. If one gunsmith has the opportunity to take an...

    Liked On: 04-07-2021, 10:15 PM

Page 76 of 177 First ... 266263646566676869707172737475767778798081828384858687888990126176 ... Last

• Jump to page: