Friwi
Member

2310 Likes

Page 46 of 154 First ... 323334353637383940414243444546474849505152535455565758596096146 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Friwi On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   I know where a replacement extractor lives if you want one.

   Liked On: 12-02-2022, 06:04 PM

2. 
   Bobba liked post by Friwi On thread : Dodgy recoil lug

   If you are scared to use the file , we could mill it for you since you are almost down the road from us.

   Liked On: 12-02-2022, 09:10 AM

3. 
   nevereadyfreddy liked post by Friwi On thread : Dodgy recoil lug

   If you are scared to use the file , we could mill it for you since you are almost down the road from us.

   Liked On: 11-02-2022, 09:23 PM

4. 
   Micky Duck liked post by Friwi On thread : Dodgy recoil lug

   If you are scared to use the file , we could mill it for you since you are almost down the road from us.

   Liked On: 11-02-2022, 08:56 PM

5. 
   CBH Australia liked post by Friwi On thread : Dodgy recoil lug

   If you are scared to use the file , we could mill it for you since you are almost down the road from us.

   Liked On: 11-02-2022, 08:34 PM

6. 
   Cigar liked post by Friwi On thread : Dodgy recoil lug

   If you are scared to use the file , we could mill it for you since you are almost down the road from us.

   Liked On: 11-02-2022, 08:08 PM

7. 
   Shamus_ liked post by Friwi On thread : Dodgy recoil lug

   If you are scared to use the file , we could mill it for you since you are almost down the road from us.

   Liked On: 11-02-2022, 07:54 PM

8. 
   stagstalker liked post by Friwi On thread : True Flite Barrel Contour

   I have a true flight 3 , fluted on a tikka . Came off a Remington from one of the forum members. It is an heavier barrel than the factory contour of my 7 saum . Or at least it feels like it. Try to...

   Liked On: 09-02-2022, 06:38 AM

9. 
   jakewire liked post by Friwi On thread : Barrel thread

   I have threaded down a Remington barrel to fit a tikka t3. With the headspace properly adjusted. Not a big deal but it takes a bit of time and care and a good lathe. At 16 tpi thread, you have your...

   Liked On: 03-02-2022, 06:10 AM

10. 
    Steve123 liked post by Friwi On thread : Zero MOA rail/base - why?

    A 20 moa rail has a difference of height of about 1mm over 200mm of length. So hardly more than a couple of mm for the longest scopes at the front objective end. Sometime just by switching the...

    Liked On: 30-01-2022, 09:23 AM

11. 
    6x47 liked post by Friwi On thread : Zero MOA rail/base - why?

    A 20 moa rail has a difference of height of about 1mm over 200mm of length. So hardly more than a couple of mm for the longest scopes at the front objective end. Sometime just by switching the...

    Liked On: 30-01-2022, 07:27 AM

12. 
    Micky Duck liked post by Friwi On thread : Zero MOA rail/base - why?

    Just going back in time, like pre 90's when there were probably not even 5 companies worldwide making sloping rails. Everybody was using 0 Moa mounts. Worst case they would shim the rear to gain a...

    Liked On: 28-01-2022, 06:10 PM

13. 
    Micky Duck liked post by Friwi On thread : Maybe need to start shooting everything we see in some areas

    Creating a live deer trapping Association or club (s)and doing Deer live trapping would be a good solution. Creating some large , high fenced areas, with water available , so that the animal...

    Liked On: 21-01-2022, 09:24 PM

14. 
    trapperjohn liked post by Friwi On thread : Maybe need to start shooting everything we see in some areas

    Creating a live deer trapping Association or club (s)and doing Deer live trapping would be a good solution. Creating some large , high fenced areas, with water available , so that the animal...

    Liked On: 21-01-2022, 07:11 AM

15. 
    Danger Mouse liked post by Friwi On thread : DPT Suppressor seized up

    Back at work tomorrow. Any body who has one of our suppressor stuck , we usually take it appart and service it at no charge. Juste bring it with you to the workshop. Cheers.

    Liked On: 17-01-2022, 08:55 AM

Page 46 of 154 First ... 323334353637383940414243444546474849505152535455565758596096146 ... Last

• Jump to page: