Friwi
Member

2290 Likes

Page 7 of 153 First 12345678910111213141516171819202157107 ... Last

• Jump to page:

1. 
   Lucky liked post by Friwi On thread : 9.3x62 loading

   Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

   Liked On: 05-02-2024, 09:09 AM

2. 
   55six liked post by Friwi On thread : Strasser Straight pull rifles ?

   The importer of them in nz is a really nice guy, and make the effort of being at every sika show. It is more a side business/ hobby for him. If they were bad rifles, they would not be produced...

   Liked On: 04-02-2024, 09:42 PM

3. 
   Tahr liked post by Friwi On thread : Best rings for Tikka setup

   Another one which is not advertised is a set of leupold ones. Same as talleys in principle but way superior in fit and finish. https://www.midwayusa.com/product/1019633534?pid=732668 Nz Asia...

   Liked On: 03-02-2024, 11:07 PM

4. 
   SPEARONZ liked post by Friwi On thread : Best rings for Tikka setup

   Another one which is not advertised is a set of leupold ones. Same as talleys in principle but way superior in fit and finish. https://www.midwayusa.com/product/1019633534?pid=732668 Nz Asia...

   Liked On: 03-02-2024, 04:42 PM

5. 
   JohnDuxbury liked post by Friwi On thread : 9.3x62 loading

   Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

   Liked On: 03-02-2024, 02:41 AM

6. 
   Micky Duck liked post by Friwi On thread : 9.3x62 loading

   Take a look at 9.3x62 journal. Heaps of loads , and history on the cartridge. The South African Author is actually based in Auckland now. You can buy his book as an e book. Well worth it. 242910

   Liked On: 01-02-2024, 09:40 PM

7. 
   RV1 liked post by Friwi On thread : Knife sharpning - Leather Strops

   You could use your grinding paste with balistol, it is meant to maintain leather souple and stop it cracking. You can make your home grinding paste by burning bits of sand paper of the grit you want...

   Liked On: 29-01-2024, 01:09 PM

8. 
   makka liked post by Friwi On thread : Helping farmers out

   https://wurstcircle.com/recipes/goose-rillette/ Here is a good recipe for these geese

   Liked On: 26-01-2024, 09:55 PM

9. 
   Cordite liked post by Friwi On thread : Home Workshop Barrel Rifling

   You could also hammer forge around a hard mandrel ;-)

   Liked On: 26-01-2024, 06:16 PM

10. 
    6.5 CRD liked post by Friwi On thread : Show me your lightweight rifle

    Kimber 308 cut at 17”. And a 7 saum in an early ken henderson stock. And there is the Howa mini as welll…

    Liked On: 24-01-2024, 08:25 PM

11. 
    Marty Henry liked post by Friwi On thread : 6 Creedmoor

    What is funny is that the 7x57 , the 6mm Lee navy and the 6.5x55 all had fast twist rate to stabilise their respective long projectiles, and that more than a century ago….

    Liked On: 23-01-2024, 09:42 PM

12. 
    Micky Duck liked post by Friwi On thread : 6 Creedmoor

    What is funny is that the 7x57 , the 6mm Lee navy and the 6.5x55 all had fast twist rate to stabilise their respective long projectiles, and that more than a century ago….

    Liked On: 23-01-2024, 09:11 PM

13. 
    Kiwi Greg liked post by Friwi On thread : 6 Creedmoor

    I had that rig in my hands last week, pretty impressive unit and top components.

    Liked On: 22-01-2024, 09:57 PM

14. 
    hotsoup liked post by Friwi On thread : Moving up in calibre - 300 Win, 300 WSM, 7mm RM or there?

    7rm, good choice. At least you can find ammo everywhere. The great thing about the arrival of 7prc, is that there might be plenty of good 7rm for sell around :-)

    Liked On: 21-01-2024, 09:32 PM

15. 
    jpurdon liked post by Friwi On thread : Moving up in calibre - 300 Win, 300 WSM, 7mm RM or there?

    7rm, good choice. At least you can find ammo everywhere. The great thing about the arrival of 7prc, is that there might be plenty of good 7rm for sell around :-)

    Liked On: 21-01-2024, 03:02 PM

Page 7 of 153 First 12345678910111213141516171819202157107 ... Last

• Jump to page: