FRST
Member

1500 Likes

Page 38 of 100 First ... 242526272829303132333435363738394041424344454647484950515288 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by FRST On thread : Lockdown light weight carbon wrap stock build - Here we go

   Thicken the resin up with some Wests powder, it won't soak into the wood nearly as much. I'd still soak that wood in that stain too, to try and keep it moisture resistant. Also the carbon wrap is...

   Liked On: 26-08-2021, 10:45 PM

2. 
   roostershooter liked post by FRST On thread : Walnut and blued steel,

   Had a go with this little honey last weekend. 7x57R K95 Stutzen 91735 91736

   Liked On: 26-08-2021, 12:58 PM

3. 
   roostershooter liked post by FRST On thread : Walnut and blued steel,

   Been cleaning this old .280 Ross for the NZDA Heritage Trust, some of you may have seen it on our Facebook page. It's Archie Kitto's old rifle and when I removed the buttplate I found the original...

   Liked On: 26-08-2021, 12:56 PM

4. 
   Scott Cowan liked post by FRST On thread : Lockdown light weight carbon wrap stock build - Here we go

   Thicken the resin up with some Wests powder, it won't soak into the wood nearly as much. I'd still soak that wood in that stain too, to try and keep it moisture resistant. Also the carbon wrap is...

   Liked On: 25-08-2021, 10:10 PM

5. 
   Bryan liked post by FRST On thread : Tikka t3 light weight mods

   I'll probably go the bolt fluting route, but the barrel won't have any add on's. Done the lightweight bolt handle and need to do the shroud too. The buttpad will be the usual foam jandal, rubber pads...

   Liked On: 25-08-2021, 11:46 AM

6. 
   57jl liked post by FRST On thread : Tikka t3 light weight mods

   I'll probably go the bolt fluting route, but the barrel won't have any add on's. Done the lightweight bolt handle and need to do the shroud too. The buttpad will be the usual foam jandal, rubber pads...

   Liked On: 23-08-2021, 06:35 PM

7. 
   thejamesjames liked post by FRST On thread : Tikka t3 light weight mods

   I'll probably go the bolt fluting route, but the barrel won't have any add on's. Done the lightweight bolt handle and need to do the shroud too. The buttpad will be the usual foam jandal, rubber pads...

   Liked On: 22-08-2021, 07:00 PM

8. 
   thejamesjames liked post by FRST On thread : Tikka t3 light weight mods

   Working on a 270 superlite at the moment as a experiment on how light I can get it. Im not going to mill the receiver though, I like the rigidity of this action and would rather not lose it. Will let...

   Liked On: 22-08-2021, 07:00 PM

9. 
   Stocky liked post by FRST On thread : Tikka t3 light weight mods

   I don't have the gear unfortunately. Sounds like an interesting idea though. I've done the Swiss cheese receiver on a another rifle. Made a little difference but not enough to warrant the cost....

   Liked On: 22-08-2021, 06:39 PM

10. 
    Gkp liked post by FRST On thread : Tikka t3 light weight mods

    I'll probably go the bolt fluting route, but the barrel won't have any add on's. Done the lightweight bolt handle and need to do the shroud too. The buttpad will be the usual foam jandal, rubber pads...

    Liked On: 22-08-2021, 02:01 PM

11. 
    Gkp liked post by FRST On thread : Tikka t3 light weight mods

    Working on a 270 superlite at the moment as a experiment on how light I can get it. Im not going to mill the receiver though, I like the rigidity of this action and would rather not lose it. Will let...

    Liked On: 22-08-2021, 02:00 PM

12. 
    MB liked post by FRST On thread : Tikka t3 light weight mods

    Seen some pretty short 308's made by Scott Trail. It comes down to acheiving a decent powder burn/speeds. I think he got the barrel down to 12 inches maybe. My memory is a bit spotty on it.

    Liked On: 22-08-2021, 02:00 PM

13. 
    Tahr liked post by FRST On thread : Tikka t3 light weight mods

    I don't have the gear unfortunately. Sounds like an interesting idea though. I've done the Swiss cheese receiver on a another rifle. Made a little difference but not enough to warrant the cost....

    Liked On: 22-08-2021, 01:03 PM

14. 
    Bill999 liked post by FRST On thread : Tikka t3 light weight mods

    I'll probably go the bolt fluting route, but the barrel won't have any add on's. Done the lightweight bolt handle and need to do the shroud too. The buttpad will be the usual foam jandal, rubber pads...

    Liked On: 22-08-2021, 11:59 AM

15. 
    Dreamer liked post by FRST On thread : Tikka t3 light weight mods

    I'll probably go the bolt fluting route, but the barrel won't have any add on's. Done the lightweight bolt handle and need to do the shroud too. The buttpad will be the usual foam jandal, rubber pads...

    Liked On: 22-08-2021, 11:35 AM

Page 38 of 100 First ... 242526272829303132333435363738394041424344454647484950515288 ... Last

• Jump to page: