Fssprecision
Member

972 Likes

Page 44 of 65 First ... 3031323334353637383940414243444546474849505152535455565758 ... Last

• Jump to page:

1. 
   XR500 liked post by Fssprecision On thread : Anyone used a supressed/moderated shotgun?

   Hi, I make a fully suppressed 410, as has been mentioned on here, in order to achieve a reasonable level of suppression the ammo must be running at sub-sonic speeds. The design that I have...

   Liked On: 11-12-2022, 08:53 PM

2. 
   Bol Tackshin liked post by Fssprecision On thread : Anyone used a supressed/moderated shotgun?

   Hi, I make a fully suppressed 410, as has been mentioned on here, in order to achieve a reasonable level of suppression the ammo must be running at sub-sonic speeds. The design that I have...

   Liked On: 11-12-2022, 06:54 AM

3. 
   Marty Henry liked post by Fssprecision On thread : Anyone used a supressed/moderated shotgun?

   Hi, I make a fully suppressed 410, as has been mentioned on here, in order to achieve a reasonable level of suppression the ammo must be running at sub-sonic speeds. The design that I have...

   Liked On: 10-12-2022, 09:49 AM

4. 
   Micky Duck liked post by Fssprecision On thread : Anyone used a supressed/moderated shotgun?

   Hi, I make a fully suppressed 410, as has been mentioned on here, in order to achieve a reasonable level of suppression the ammo must be running at sub-sonic speeds. The design that I have...

   Liked On: 10-12-2022, 08:55 AM

5. 
   Carbine liked post by Fssprecision On thread : Maximum Suppression

   Running suppressors wet can improve performance slightly. adding a squirt of oil or smearing grease inside the can can help for the first few shots

   Liked On: 23-11-2022, 10:40 PM

6. 
   55six liked post by Fssprecision On thread : Maximum Suppression

   Running suppressors wet can improve performance slightly. adding a squirt of oil or smearing grease inside the can can help for the first few shots

   Liked On: 23-11-2022, 06:53 AM

7. 
   Tikka7mm08 liked post by Fssprecision On thread : Old Shotgun Gurus - help with Cogswell & Harrison

   A while ago I sold a Greener for $1,100 and that did not have a case, so maybe $1,500 on a good day for this. That said the value of these old guns has dropped with the push towards steel shot (which...

   Liked On: 19-11-2022, 06:38 PM

8. 
   Russian 22. liked post by Fssprecision On thread : Floating reamer holder

   Just getting into a bit more chambering for the odd special and research seems to show that many use a floating reamer holder to ensure perfect alignment of the reamer to the barrel blank. After...

   Liked On: 13-11-2022, 09:06 PM

9. 
   Roarless20 liked post by Fssprecision On thread : Floating reamer holder

   Just getting into a bit more chambering for the odd special and research seems to show that many use a floating reamer holder to ensure perfect alignment of the reamer to the barrel blank. After...

   Liked On: 13-11-2022, 07:33 PM

10. 
    rupert liked post by Fssprecision On thread : Floating reamer holder

    Just getting into a bit more chambering for the odd special and research seems to show that many use a floating reamer holder to ensure perfect alignment of the reamer to the barrel blank. After...

    Liked On: 13-11-2022, 05:08 PM

11. 
    canross liked post by Fssprecision On thread : Chamber adaptors

    So, following on from my post about chambering, I tried out the reamer holder and using off cuts from a recent job made a couple of 12G to 9mm chamber adaptors.

    Liked On: 13-11-2022, 02:28 PM

12. 
    Matt2308 liked post by Fssprecision On thread : Chamber adaptors

    So, following on from my post about chambering, I tried out the reamer holder and using off cuts from a recent job made a couple of 12G to 9mm chamber adaptors.

    Liked On: 13-11-2022, 02:05 PM

13. 
    Micky Duck liked post by Fssprecision On thread : Chamber adaptors

    So, following on from my post about chambering, I tried out the reamer holder and using off cuts from a recent job made a couple of 12G to 9mm chamber adaptors.

    Liked On: 13-11-2022, 11:53 AM

14. 
    Marty Henry liked post by Fssprecision On thread : Chamber adaptors

    So, following on from my post about chambering, I tried out the reamer holder and using off cuts from a recent job made a couple of 12G to 9mm chamber adaptors.

    Liked On: 13-11-2022, 11:49 AM

15. 
    Boxton liked post by Fssprecision On thread : Range/target camera

    Look at long shot target cameras - 300m to 2 miles … seen them to 1200m and several cameras at once https://owloptics.nz/collections/longshot-target-cameras

    Liked On: 23-10-2022, 12:17 PM

Page 44 of 65 First ... 3031323334353637383940414243444546474849505152535455565758 ... Last

• Jump to page: