Gkp
Member

1800 Likes

Page 107 of 120 First ... 75793949596979899100101102103104105106107108109110111112113114115116117118119120 Last

• Jump to page:

1. 
   tikka liked post by Gkp On thread : 6.5 prc loads

   G'day all. I have a 20 inch 6.5 prc and have found a good accurate load with the 147 eldm that shoots 0.3 moa at worst and avg 2990 fps with 3.3 ES. Happy Chappy Shot this old bruiser at 350 yards...

   Liked On: 24-05-2020, 07:41 PM

2. 
   HUNTY liked post by Gkp On thread : 6.5 prc loads

   G'day all. I have a 20 inch 6.5 prc and have found a good accurate load with the 147 eldm that shoots 0.3 moa at worst and avg 2990 fps with 3.3 ES. Happy Chappy Shot this old bruiser at 350 yards...

   Liked On: 24-05-2020, 05:55 PM

3. 
   veitnamcam liked post by Gkp On thread : 6.5 prc loads

   G'day all. I have a 20 inch 6.5 prc and have found a good accurate load with the 147 eldm that shoots 0.3 moa at worst and avg 2990 fps with 3.3 ES. Happy Chappy Shot this old bruiser at 350 yards...

   Liked On: 24-05-2020, 11:13 AM

4. 
   Mathias liked post by Gkp On thread : 6.5 prc loads

   G'day all. I have a 20 inch 6.5 prc and have found a good accurate load with the 147 eldm that shoots 0.3 moa at worst and avg 2990 fps with 3.3 ES. Happy Chappy Shot this old bruiser at 350 yards...

   Liked On: 24-05-2020, 10:23 AM

5. 
   Moa Hunter liked post by Gkp On thread : 6.5 prc loads

   G'day all. I have a 20 inch 6.5 prc and have found a good accurate load with the 147 eldm that shoots 0.3 moa at worst and avg 2990 fps with 3.3 ES. Happy Chappy Shot this old bruiser at 350 yards...

   Liked On: 24-05-2020, 10:14 AM

6. 
   25 /08 IMP liked post by Gkp On thread : 6.5 prc loads

   G'day all. I have a 20 inch 6.5 prc and have found a good accurate load with the 147 eldm that shoots 0.3 moa at worst and avg 2990 fps with 3.3 ES. Happy Chappy Shot this old bruiser at 350 yards...

   Liked On: 24-05-2020, 09:55 AM

7. 
   kiwi-adam liked post by Gkp On thread : Tikka t3 light weight mods

   Received my after market trigger spring today, fitted in 5 minutes and made a huge difference. Much lighter pull weight

   Liked On: 21-05-2020, 06:25 PM

8. 
   bigbear liked post by Gkp On thread : Bike Porn - Regardless of the motor, Show off your "two wheeled" beasties

   140165 My old trusty getting taken for a joy ride by a deer with no head. Still can't figure out how he could see where he was going!

   Liked On: 19-05-2020, 06:38 PM

9. 
   dannyb liked post by Gkp On thread : can't leave well enough alone 7mm rem mag 180gn eldm and VLD

   Sweet as pic 5, 2970 fps. That's a good load, off hunting you go! I assume that's the 162 eldm?

   Liked On: 18-05-2020, 07:01 PM

10. 
    The Claw liked post by Gkp On thread : 7mm Blaser Mag and 2217 or 2225

    Have a look at Kelton posts, he had a load with 2225, from memory it was in the low 70ish grains

    Liked On: 15-05-2020, 10:29 PM

11. 
    dannyb liked post by Gkp On thread : can't leave well enough alone 7mm rem mag 180gn eldm and VLD

    My vote goes to the 180 eldm. More predictable at closer ranges due to the extra mass, they don't tend to blow up at high speed like there lighter counterpart. Also less wind drift. I believe the...

    Liked On: 14-05-2020, 10:55 PM

12. 
    Shearer liked post by Gkp On thread : Subsonic load for 308

    You will probably find that closer to 10 grains is sub sonic for an over 200 gr projectile. Just have a play around, that's what reloading is all about.

    Liked On: 09-05-2020, 07:27 PM

13. 
    SlimySquirrel liked post by Gkp On thread : Tikka t3 light weight mods

    I just found this aussie site that may be of interest and a good place to source a spring replacement https://highvelocityhuntingaustralia.com.au/

    Liked On: 05-05-2020, 01:31 PM

14. 
    SlimySquirrel liked post by Gkp On thread : Tikka t3 light weight mods

    G'day, thought I would ask you guys about tikka triggers. I am guessing I have been spoilt by the Triggertec Diamond on my last shooter and now I am hating the trigger on the tikka that has just...

    Liked On: 05-05-2020, 01:31 PM

15. 
    mimms2 liked post by Gkp On thread : Subsonic load for 308

    You will probably find that closer to 10 grains is sub sonic for an over 200 gr projectile. Just have a play around, that's what reloading is all about.

    Liked On: 03-05-2020, 11:09 AM

Page 107 of 120 First ... 75793949596979899100101102103104105106107108109110111112113114115116117118119120 Last

• Jump to page: