grandpamac
Member

4162 Likes

Page 147 of 278 First ... 4797133134135136137138139140141142143144145146147148149150151152153154155156157158159160161197247 ... Last

• Jump to page:

1. 
   20 Bore liked post by grandpamac On thread : A few 308 questions.

   Greetings Trout, Using a cheap plated projectile like the Frontier 150 grain and a reduced load about $20.00 a box of 20. Closer to $30.00 a box of 20 for the cheapest soft points. This is not much...

   Liked On: 19-01-2022, 09:24 AM

2. 
   A330driver liked post by grandpamac On thread : A few 308 questions.

   Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...

   Liked On: 19-01-2022, 02:30 AM

3. 
   winaa liked post by grandpamac On thread : Shoulder bumping

   Greetings All, My loads for my 2 .303 rifles are very light and the cases are only neck sized. With loads that develop a pressure of about 35,000 CUP the cases do not stretch at all and you can neck...

   Liked On: 18-01-2022, 07:25 AM

4. 
   JohnQT liked post by grandpamac On thread : Full Length or Neck sizing. What is better and why?

   Greetings All, Until recently I neck sized most of my cases, mostly using cartridge specific neck sizing dies. Recently I have moved over to minimal FL sizing using the Redding competition shell...

   Liked On: 17-01-2022, 09:33 PM

5. 
   Trout liked post by grandpamac On thread : Better accuracy for my 308

   Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...

   Liked On: 17-01-2022, 12:14 PM

6. 
   Danny liked post by grandpamac On thread : Better accuracy for my 308

   Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...

   Liked On: 17-01-2022, 11:09 AM

7. 
   BSA270 liked post by grandpamac On thread : ADI 2207 and short barrel 308

   Greetings Pete_D, I echo much of what has been said before. You state that the aim is for a light load in a short barrel .308 with light projectiles. I note that you have found data on the ADI site...

   Liked On: 16-01-2022, 09:05 PM

8. 
   Micky Duck liked post by grandpamac On thread : A few 308 questions.

   Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...

   Liked On: 16-01-2022, 06:24 PM

9. 
   LMcNab liked post by grandpamac On thread : A few 308 questions.

   Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...

   Liked On: 16-01-2022, 06:17 PM

10. 
    Ned liked post by grandpamac On thread : A few 308 questions.

    Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...

    Liked On: 16-01-2022, 05:58 PM

11. 
    JimmyJames liked post by grandpamac On thread : New Tikka .308 zeroing issues

    Greetings JimmyJames and all, Reading through some of the responces and looking at what could only generously called groups it strikes me that something serious is out of whack. The fact you managed...

    Liked On: 15-01-2022, 05:45 PM

12. 
    Jaco Goosen liked post by grandpamac On thread : New Tikka .308 zeroing issues

    Greetings JimmyJames and all, Reading through some of the responces and looking at what could only generously called groups it strikes me that something serious is out of whack. The fact you managed...

    Liked On: 15-01-2022, 05:28 PM

13. 
    Pete_D liked post by grandpamac On thread : ADI 2207 and short barrel 308

    Greetings Pete_D, I echo much of what has been said before. You state that the aim is for a light load in a short barrel .308 with light projectiles. I note that you have found data on the ADI site...

    Liked On: 15-01-2022, 05:01 PM

14. 
    Micky Duck liked post by grandpamac On thread : ADI 2207 and short barrel 308

    Greetings Pete_D, I echo much of what has been said before. You state that the aim is for a light load in a short barrel .308 with light projectiles. I note that you have found data on the ADI site...

    Liked On: 15-01-2022, 11:46 AM

15. 
    caberslash liked post by grandpamac On thread : 308 vs 30/06

    Greetings Frogfeatures, Looking at the rifles that you already have I wonder if you have considered the intermediate calibres between the .243 and 30 cal. The 30 calibres are great (I have several)...

    Liked On: 13-01-2022, 07:11 PM

Page 147 of 278 First ... 4797133134135136137138139140141142143144145146147148149150151152153154155156157158159160161197247 ... Last

• Jump to page: