grandpamac
Member

4752 Likes

Page 267 of 317 First ... 167217253254255256257258259260261262263264265266267268269270271272273274275276277278279280281 ... Last

• Jump to page:

1. 
   Pav liked post by grandpamac On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   Greetings Pav and All, The curmudgeon in me forces me to say that with the two cartridges you mention just about any reasonable load will shoot well. Returning to the actual question you asked it is...

   Liked On: 20-01-2021, 07:47 PM

2. 
   Micky Duck liked post by grandpamac On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   Greetings Pav and All, The curmudgeon in me forces me to say that with the two cartridges you mention just about any reasonable load will shoot well. Returning to the actual question you asked it is...

   Liked On: 20-01-2021, 07:35 PM

3. 
   gonebush liked post by grandpamac On thread : No end in sight

   Greetings All, Periodic lack of supply of handloading components has been ongoing for some time now. It is driven by panic buying primarily in the US driven by their electoral cycle and should not...

   Liked On: 19-01-2021, 12:45 PM

4. 
   Kiwi Sapper liked post by grandpamac On thread : No end in sight

   Greetings All, Periodic lack of supply of handloading components has been ongoing for some time now. It is driven by panic buying primarily in the US driven by their electoral cycle and should not...

   Liked On: 18-01-2021, 06:44 PM

5. 
   doinit liked post by grandpamac On thread : Resurgence of interest in the old "Three Oh"?

   Greetings All, After seeing all those photo's of pristine Lee Enfields a few pages back I thought I would share a couple of my scoped .303.141088141089 Almost every major component has been altered...

   Liked On: 18-01-2021, 06:14 PM

6. 
   Tikka7mm08 liked post by grandpamac On thread : Speed vs pressure

   Greetings Cigar and All, The answer is yes, sort of. John Barsness did an excellent article in Handloader a while back. He found a strong relationship between velocity and pressure and worked up...

   Liked On: 17-01-2021, 01:48 PM

7. 
   Cordite liked post by grandpamac On thread : Lee Loader .303 - what size scoop did Lee include?

   Greetings Cordite, Worth remembering that powder equivalents are based on speed not volume so you need to check with your scales how much powder the scoop throws. ADI powders can be more dense than...

   Liked On: 16-01-2021, 05:04 PM

8. 
   Micky Duck liked post by grandpamac On thread : Is it 'Cold Bore' or 'Foul Bore' ?

   Greetings All, Most people fall into somewhere between fastidious and lax on rifle cleaning after a few years. This is pretty much where I am. A patch with Hoppes no 9 followed by a nylon bristle...

   Liked On: 16-01-2021, 12:29 PM

9. 
   Mathias liked post by grandpamac On thread : Is it 'Cold Bore' or 'Foul Bore' ?

   Greetings All, Most people fall into somewhere between fastidious and lax on rifle cleaning after a few years. This is pretty much where I am. A patch with Hoppes no 9 followed by a nylon bristle...

   Liked On: 16-01-2021, 12:14 PM

10. 
    Tikka7mm08 liked post by grandpamac On thread : Is it 'Cold Bore' or 'Foul Bore' ?

    Greetings All, Most people fall into somewhere between fastidious and lax on rifle cleaning after a few years. This is pretty much where I am. A patch with Hoppes no 9 followed by a nylon bristle...

    Liked On: 16-01-2021, 12:03 PM

11. 
    Butch73 liked post by grandpamac On thread : Keeping it Simple for New Handloaders

    Greetings G.I_Joel, Thanks for your kind words. I think that handloading is not something that you ever completely master, although you may fool yourself that you have for a time. I certainly fall...

    Liked On: 15-01-2021, 08:42 PM

12. 
    Moa Hunter liked post by grandpamac On thread : Resurgence of interest in the old "Three Oh"?

    Lets all remember that the 7.7 x 56 mm cartridge aka .303 was designed as a metric rimless cartridge by a Major Rubin in Switzerland. The only input the Brits had was to put a rim on it. Grandpamac.

    Liked On: 14-01-2021, 08:16 AM

13. 
    bunji liked post by grandpamac On thread : Resurgence of interest in the old "Three Oh"?

    Greetings All, After seeing all those photo's of pristine Lee Enfields a few pages back I thought I would share a couple of my scoped .303.141088141089 Almost every major component has been altered...

    Liked On: 14-01-2021, 01:47 AM

14. 
    bunji liked post by grandpamac On thread : Resurgence of interest in the old "Three Oh"?

    Greetings Csmiffy, There are likely plenty of .303 Lee Enfields out there with groove diameter's that large that shoot quite well, especially the two groove barrels. I think where Ruger may have...

    Liked On: 14-01-2021, 01:16 AM

15. 
    Micky Duck liked post by grandpamac On thread : Stroll with New Gun...

    Greetings All, Nice to see someone hunting without a scope. Open sights become problematic to most of us with a lot of years on the clock. An aperture and blade is more forgiving as we just look...

    Liked On: 12-01-2021, 09:32 PM

Page 267 of 317 First ... 167217253254255256257258259260261262263264265266267268269270271272273274275276277278279280281 ... Last

• Jump to page: