grandpamac
Member

4758 Likes

Page 291 of 318 First ... 191241277278279280281282283284285286287288289290291292293294295296297298299300301302303304305 ... Last

• Jump to page:

1. 
   Micky Duck liked post by grandpamac On thread : How much does handloading improve accuracy?

   Greetings All, To answer the original question sub MoA should be possible in a good .223 Rem rifle. There are some conditions though. First the rifle must be capable of it. Second the shooter needs...

   Liked On: 13-07-2020, 08:19 PM

2. 
   zimmer liked post by grandpamac On thread : How much does handloading improve accuracy?

   Hodgdons lists 26.5 grains as max for the 50 grain Speer soft point, not the Barnes. 26.5 grains is over max for the Barnes especially when seated too close to the lands as you have. As the other...

   Liked On: 13-07-2020, 07:46 PM

3. 
   Boaraxa liked post by grandpamac On thread : How much does handloading improve accuracy?

   I don't think I have ever seen a .223 shoot that badly. My first thought is that something is loose or the scope is shot. Further your projectiles are too close to the lands. Barnes recommends a bare...

   Liked On: 13-07-2020, 07:22 PM

4. 
   matagouri liked post by grandpamac On thread : Reloading

   Greetings All, There has been some chatter that the demand for shooting products in the US has increased recently, possibly fueled by the increasing likely hood of a Democrat President being elected...

   Liked On: 11-07-2020, 11:22 AM

5. 
   Phil_H liked post by grandpamac On thread : Newbie advice

   Greetings AWBates, Here are my current loads for the .308 and .303 that work well for me. For the .308 I have been loading the Norma 150 grain semi pointed projectiles for hunting since the early...

   Liked On: 10-07-2020, 04:34 PM

6. 
   Finnwolf liked post by grandpamac On thread : Reloading

   Greetings All, There has been some chatter that the demand for shooting products in the US has increased recently, possibly fueled by the increasing likely hood of a Democrat President being elected...

   Liked On: 10-07-2020, 02:34 PM

7. 
   Phil_H liked post by grandpamac On thread : Reloading

   Greetings All, There has been some chatter that the demand for shooting products in the US has increased recently, possibly fueled by the increasing likely hood of a Democrat President being elected...

   Liked On: 10-07-2020, 01:42 PM

8. 
   Max Headroom liked post by grandpamac On thread : Reloading

   Greetings All, There has been some chatter that the demand for shooting products in the US has increased recently, possibly fueled by the increasing likely hood of a Democrat President being elected...

   Liked On: 10-07-2020, 12:50 PM

9. 
   Phil_H liked post by grandpamac On thread : Newbie advice

   Greetings AWBates, I wouldn't discount the Lee Loader kit too quickly. I load most of my .303 ammunition using a Lee Loader to neck size the cases. There are a couple of things that I would be...

   Liked On: 08-07-2020, 04:11 PM

10. 
    WillB liked post by grandpamac On thread : Newbie advice

    Greetings AWBates, I wouldn't discount the Lee Loader kit too quickly. I load most of my .303 ammunition using a Lee Loader to neck size the cases. There are a couple of things that I would be...

    Liked On: 08-07-2020, 03:09 PM

11. 
    shooternz liked post by grandpamac On thread : Flat primers

    Greetings Stevodog, Primers that look like that are common with 6.5 x 55 cases that are full length sized. A lot of the US dies set the shoulder back too far, even for commercial rifles, and the the...

    Liked On: 05-07-2020, 04:52 PM

12. 
    Micky Duck liked post by grandpamac On thread : Flat primers

    Greetings All, In my experience partial sizing works best in more tapered cases, like the 6.5 x 55, .30-06 etc when loaded to lower pressure. Cases like the .308 often do better with either minimal...

    Liked On: 04-07-2020, 03:49 PM

13. 
    Moa Hunter liked post by grandpamac On thread : new Science investigations about Moa diet and their influence on the NZ Forests

    You would have to make sure it was well fed and I wouldn't let it sit on your shoulder. Grandpamac.

    Liked On: 02-07-2020, 08:06 PM

14. 
    johnd liked post by grandpamac On thread : Resizing. 308 to .243, help?? Or a dumb idea?

    Sorry Larrygoat, Bad idea to neck down that much. You are still going to need neck annealing after which the cases may not shoot that well due to uneven neck thickness. Buy some proper .243 cases...

    Liked On: 01-07-2020, 08:28 PM

15. 
    ChrisW liked post by grandpamac On thread : First time reloading lead projectiles. Some Issues, help

    You need a special die to open up the first part of the neck to seat cast lead. Also shout yourself a copy of the Lyman Cast Bullet Handbook. Its all in there. Grandpamac.

    Liked On: 30-06-2020, 08:51 PM

Page 291 of 318 First ... 191241277278279280281282283284285286287288289290291292293294295296297298299300301302303304305 ... Last

• Jump to page: