Greetings, From my testing in the .308 the ADI powders, including AR2208 seemed to shoot a bit better than IMR4064 at lower pressure and AR2208 looks the best of the bunch from your results. One...
Liked On: 22-10-2023, 10:53 AM
Greetings, From my testing in the .308 the ADI powders, including AR2208 seemed to shoot a bit better than IMR4064 at lower pressure and AR2208 looks the best of the bunch from your results. One...
Liked On: 22-10-2023, 10:39 AM
Greetings, From my testing in the .308 the ADI powders, including AR2208 seemed to shoot a bit better than IMR4064 at lower pressure and AR2208 looks the best of the bunch from your results. One...
Liked On: 22-10-2023, 09:59 AM
Greetings again, The point I forgot to make is that your confidence range of loads is much wider with AR2206H than other powders. My experience with AR2206H in the .308 and .303 is that loads much...
Liked On: 21-10-2023, 08:35 PM
Greetings Jhon, If you are wanting to keep the wear and tear on the barrel down then reducing the powder charge is key. Personally I would keep away from the slow and ball powders. For flexibility...
Liked On: 21-10-2023, 08:35 PM
Greetings blip, Good point about a new barrel. Those Mohawks are getting a bit long in the tooth for a barrel burner like the .243. On the powders you first mentioned all should be fine with IMR4064...
Liked On: 21-10-2023, 06:12 PM
Greetings dannyb and all, I am a long time fan of the .308. One of the things I have found is that the continental brass, with the exception of Norma, can be quite a bit heavier than the US stuff. I...
Liked On: 19-10-2023, 10:27 PM
Greetings zimmer, I still look very hard at chronograph reading that do not match predicted velocity and also tend to stop adding powder too soon which beats the alternative. My chronograph is a 35P...
Liked On: 19-10-2023, 06:10 PM
Greetings Jhon, The 44 WCF (later .44-40) is a very old cartridge and the chambers can be all over the place. I would be reasonably sure that your problem is an oversize section on the case where...
Liked On: 18-10-2023, 05:37 PM
Greetings, In my near new 2 groove .303 barrel 32 grains of AR2206H gave around 2,050 fps with late manufacture 174 grain Hornady RN. The later projectiles are blunter and gave around 150 fps more...
Liked On: 17-10-2023, 10:03 AM
Greetings, In my near new 2 groove .303 barrel 32 grains of AR2206H gave around 2,050 fps with late manufacture 174 grain Hornady RN. The later projectiles are blunter and gave around 150 fps more...
Liked On: 16-10-2023, 04:02 PM
Greetings, In my near new 2 groove .303 barrel 32 grains of AR2206H gave around 2,050 fps with late manufacture 174 grain Hornady RN. The later projectiles are blunter and gave around 150 fps more...
Liked On: 16-10-2023, 02:26 PM
Greetings Phil, Those Bergara's are infectious aren't they. I got one a year or two back. Mine, also a .308 with the 20 inch barrel now has a DPT muzzle forward can and a 1.5 to 5 power scope. I do...
Liked On: 13-10-2023, 07:59 PM
Greetings, Is there some neat stuff around these days or what. A neat little rifle for just walking around. It's this type of thing that spins my wheels these days. Nice trim single shots that you...
Liked On: 13-10-2023, 07:22 AM
Greetings, Is there some neat stuff around these days or what. A neat little rifle for just walking around. It's this type of thing that spins my wheels these days. Nice trim single shots that you...
Liked On: 13-10-2023, 07:07 AM