Grantn
Member

353 Likes

Page 17 of 24 First ... 3456789101112131415161718192021222324 Last

• Jump to page:

1. 
   Grantn liked post by Gibo On thread : Shes my hero

   My 9yo really earned this one. She has been studying up on deer anatomy and has showed awesome discipline behind the trigger. After sitting patently behind the rifle on a red at 95 yards for over...

   Liked On: 06-11-2022, 07:31 AM

2. 
   Grantn liked post by Dundee On thread : Catch Any Trout Today?

   I got a Bo...don't need a net:D 208512 208513

   Liked On: 05-11-2022, 07:57 AM

3. 
   Grantn liked post by 199p On thread : Should I cut my 6.5 PRC to 20"?

   Only the 1st time haha cut back so many unfired now it feels odd if i don't

   Liked On: 04-11-2022, 02:23 PM

4. 
   Grantn liked post by Wingman On thread : Should I cut my 6.5 PRC to 20"?

   I have cut plenty to 20" and as short as 18". Drops factory ammo velocity down to about 24" creedmoor speeds but you can rake much of it back if you hand load with a faster burning powder.

   Liked On: 04-11-2022, 10:27 AM

5. 
   Grantn liked post by Larskramer On thread : Should I cut my 6.5 PRC to 20"?

   mates prc runs at 19", it throws 140g bt @ 2997fps. Kills every time. load developed and verified out to 850m, furtherest instant drop is around 580m at present.

   Liked On: 04-11-2022, 10:27 AM

6. 
   Grantn liked post by Friwi On thread : Should I cut my 6.5 PRC to 20"?

   I have cut a Bergara mountain 6.5 prc to 20” the other day and fitted a Dpt on it. Very well balanced . Specially with the carbon factory stock which is of really good quality.

   Liked On: 04-11-2022, 07:50 AM

7. 
   Grantn liked post by Moa Hunter On thread : Should I cut my 6.5 PRC to 20"?

   Remember, even with a suppressor hearing protection is still needed with that class of cartridge, so perhaps running it without the suppressor and hanging some ear plugs from your hat might be worth...

   Liked On: 04-11-2022, 07:50 AM

8. 
   Grantn liked post by veitnamcam On thread : Should I cut my 6.5 PRC to 20"?

   Mines at 22 but it could be 20 and wouldn't lose much really.... getting high 2900s with 153 atip

   Liked On: 04-11-2022, 07:49 AM

9. 
   Grantn liked post by dannyb On thread : Should I cut my 6.5 PRC to 20"?

   I run a 19" 300wsm and love it, yup sure a 24" 300wsm would get heaps more velocity but the 19" is just so much nicer to carry and is still plenty enough out to plenty far away, In summary if you...

   Liked On: 04-11-2022, 07:49 AM

10. 
    Grantn liked post by nitram On thread : Should I cut my 6.5 PRC to 20"?

    Do it you won’t regret it. I have a 7mm rem mag I cut down from 26” to 22”. I ended up losing next to no velocity as I just stoked my load up a bit. Have just put a 20” 6.5prc barrel on one of my...

    Liked On: 04-11-2022, 07:49 AM

11. 
    Grantn liked post by distant stalker On thread : Seeking advice re barrel length for a .308 and 7mm-08

    Sell the 308 and buy the 284 listed in the buy/sell section, the 708 will stay in good condition and protect its sentimental value as the 284 will do everything from near to far Alternatively sell...

    Liked On: 02-11-2022, 10:46 PM

12. 
    Grantn liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    131416

    Liked On: 27-10-2022, 09:24 AM

13. 
    Grantn liked post by kiwigreen On thread : calibre for short barrel(18-20")longer range(-600m) rifle

    18" .308 running 168gr eldm @ 2670fps seems to do a bit of this and that at any range, much better than sst at close range. Just wouldn't use it on a red at 15m in the roar apart from that it's the...

    Liked On: 29-08-2022, 09:58 PM

14. 
    Grantn liked post by Husky1600 On thread : Hunting with kids under 10 - must haves

    And we want to see the pic's and report soon after you get home. Its great to see parenting done right.

    Liked On: 29-08-2022, 09:51 PM

15. 
    Grantn liked post by Gibo On thread : Hunting with kids under 10 - must haves

    Bolt, shit, nearly forgot :D

    Liked On: 29-08-2022, 09:51 PM

Page 17 of 24 First ... 3456789101112131415161718192021222324 Last

• Jump to page: