GSP HUNTER
Member

1518 Likes

Page 18 of 102 First ... 456789101112131415161718192021222324252627282930313268 ... Last

• Jump to page:

1. 
   GSP HUNTER liked post by Micky Duck On thread : Tikka T3 .270 with 130gn interlocks

   I'm going to make that really easy for you...75mm/3" at hundy is going to be very close to spot on at 270 yards and will be 4" low at 350 give or take .... Try it and see. You will be surprised in a...

   Liked On: 08-10-2024, 08:28 PM

2. 
   GSP HUNTER liked post by RUMPY On thread : Tikka T3 .270 with 130gn interlocks

   That's a pretty good group, I'd just go and shoot things. You'll spend a lot of time and money trying to get better and probably find yourself back at this load anyway.

   Liked On: 08-10-2024, 08:27 PM

3. 
   GSP HUNTER liked post by Friwi On thread : Muzzle Brake Dimension/ Clearance Question .

   0.6 mm above real projectile diameter at minimum….provided everything is properly lined up. But even if it is 1mm or 1.2mm above hole diameter, usually a good brake will still be very effective. ...

   Liked On: 08-10-2024, 08:31 AM

4. 
   GSP HUNTER liked post by Marty Henry On thread : Howa 1500 .243 mods

   You can spend a lot on any rifle and not improve it at all. If it's got a hogue clammy plastic stock getting rid of that would be all I'd suggest. The howa hact triggers are superb and that Burris...

   Liked On: 08-10-2024, 07:10 AM

5. 
   GSP HUNTER liked post by Southcity On thread : Walnut and blued steel,

   My latest falling block addition.Winchester 1885 with a Custom NZ walnut stock by Laurie Bradley, in 220 Swift. 260721 260722

   Liked On: 08-10-2024, 06:19 AM

6. 
   GSP HUNTER liked post by Westie On thread : Tikka T3 .270 with 130gn interlocks

   I recently started reloading and have settled on a combo of AR2209 (H4350) plus Remington large rifle primers (what I could get my hand on at the time) along with Hornady interlock 130gn SP. Running...

   Liked On: 07-10-2024, 06:52 AM

7. 
   GSP HUNTER liked post by dannyb On thread : Oaro block kaikoura

   The farmer is ok, like Stug says if you come across him, have your permits and don't be dicks. Follow the rules and you'll be fine. I used to hunt the private block on the other side of the river to...

   Liked On: 06-10-2024, 07:49 PM

8. 
   GSP HUNTER liked post by Micky Duck On thread : 7mm Rem Mag light loads

   Too easy. Drop down in projectiles weight to say a 139-140 and use start load data. And if want really light use trail boss and Thier formular....which is basically as simple as finding a std load...

   Liked On: 06-10-2024, 05:57 PM

9. 
   GSP HUNTER liked post by dannyb On thread : Practice make perfect 300prc load development

   Now remember this is 8 rounds not 3, if I took a shot of the first 5 rounds it was pretty much 1 hole :O_O: 260640 So 8 rounds for .6" @ 2818fps ....that'll do very nicely 260642

   Liked On: 06-10-2024, 04:28 PM

10. 
    GSP HUNTER liked post by dannyb On thread : Practice make perfect 300prc load development

    Factory C.O.A.L is 3.680" My hand loads are at 3.731" 260177

    Liked On: 06-10-2024, 04:28 PM

11. 
    GSP HUNTER liked post by 30.06king On thread : Clements getting hammered?

    Sadly, this is not uncommon behaviour these days. Not just as in this example but including urban rubbish dumped on quieter roadsides, in parks, on farmers lands. I despair to some degree. Where in...

    Liked On: 06-10-2024, 04:27 PM

12. 
    GSP HUNTER liked post by craigc On thread : A Generational Shift - A Tale of the 300s

    If you google ‘300 SAUM’ the following is one of the top results: 260592 So if I’m now in possession of that same 300 SAUM you’d be able to work out I’m a pretty lucky man and also very...

    Liked On: 06-10-2024, 01:25 PM

13. 
    GSP HUNTER liked post by RUMPY On thread : First deer for a while.

    The mighty 270 on this massive beast, didn't want to take the risk heading into big country like that with the piss arsed little 223.

    Liked On: 06-10-2024, 09:43 AM

14. 
    GSP HUNTER liked post by 7mm tragic On thread : Considering upgrading from 7mm08 to possibly 270 or something else

    Went through the same conundrum a couple of months ago. 708 was doing okay but wanted a bit lighter and something that would take the knocks in the bush. Ended up getting a Kimber in 280AI. ...

    Liked On: 04-10-2024, 04:41 PM

15. 
    GSP HUNTER liked post by Hugh Shields On thread : Roasted Canada Goose Drumsticks Last Week

    gonetropo "Meat is Neat!" I still haven't cooked the perfect goose dish....I'm convinced the secret lies in aging it, marinated in some which breaks is down, like kiwi fruit, then cook it lond and...

    Liked On: 03-10-2024, 06:08 AM

Page 18 of 102 First ... 456789101112131415161718192021222324252627282930313268 ... Last

• Jump to page: