gundoc
Member

4190 Likes

Page 101 of 280 First ... 5187888990919293949596979899100101102103104105106107108109110111112113114115151201 ... Last

• Jump to page:

1. 
   Shamus_ liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   One of the triggers I cut my teeth on when I started professional gunsmithing more than 50 years ago was the 3-lever BSA trigger as found on the Royal, Viscount, Hunter, and early Majestic rifles,...

   Liked On: 11-02-2022, 07:55 PM

2. 
   tamamutu liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   One of the triggers I cut my teeth on when I started professional gunsmithing more than 50 years ago was the 3-lever BSA trigger as found on the Royal, Viscount, Hunter, and early Majestic rifles,...

   Liked On: 11-02-2022, 07:49 PM

3. 
   Makros liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   One of the triggers I cut my teeth on when I started professional gunsmithing more than 50 years ago was the 3-lever BSA trigger as found on the Royal, Viscount, Hunter, and early Majestic rifles,...

   Liked On: 11-02-2022, 07:40 PM

4. 
   Micky Duck liked post by gundoc On thread : Pistol Storage Rules

   The approvals have to be done by a registered engineer who will sign his name to the certificate, as the Police are not qualified to make such decisions. For a one-off item it will be quite expensive...

   Liked On: 11-02-2022, 08:50 AM

5. 
   Micky Duck liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 11-02-2022, 08:35 AM

6. 
   csmiffy liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 11-02-2022, 07:20 AM

7. 
   Cigar liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 10-02-2022, 11:32 PM

8. 
   Husky1600 liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 10-02-2022, 10:28 PM

9. 
   Makros liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 10-02-2022, 10:14 PM

10. 
    mikee liked post by gundoc On thread : Pistol Storage Rules

    The approvals have to be done by a registered engineer who will sign his name to the certificate, as the Police are not qualified to make such decisions. For a one-off item it will be quite expensive...

    Liked On: 10-02-2022, 02:29 PM

11. 
    300CALMAN liked post by gundoc On thread : Idoits that get firearm licences

    Idiots are a widespread problem. I know of a few similar incidents by our 'trained' Police officers. Most incidents of that sort are caused by lack of attention and no thought given to the potential...

    Liked On: 08-02-2022, 11:54 PM

12. 
    10-Ring liked post by gundoc On thread : Barrel thread

    The Remington M700 thread is 1-1/6"x16 (1.062" x 16) which is the same nominal thread as the Bergara and some other actions but that does not meant they are interchangeable. Barrel thread length,...

    Liked On: 05-02-2022, 08:58 AM

13. 
    csmiffy liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

    You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

    Liked On: 05-02-2022, 07:53 AM

14. 
    Bill999 liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

    You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

    Liked On: 04-02-2022, 06:48 PM

15. 
    tetawa liked post by gundoc On thread : Suppressor thread question

    Take it back to the guy who cut the thread, along with suppressor you intend to use. It is a simple job to repair, 15 minutes tops!

    Liked On: 04-02-2022, 07:24 AM

Page 101 of 280 First ... 5187888990919293949596979899100101102103104105106107108109110111112113114115151201 ... Last

• Jump to page: