About gundoc

Basic Information


Age
76
About gundoc
Biography:
Over 50 years as a gunsmith, now semi-retired.
Location:
Central Otago
Interests:
Hunting, pistol shooting, collecting
Occupation:
retired

Statistics


Total Posts
Total Posts
2,239
Posts Per Day
0.64
General Information
Last Activity
Yesterday 10:49 PM
Join Date
22-11-2014
Referrals
1

3907 Likes

  1. csmiffy
    csmiffy liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 11-07-2022, 01:29 PM
  2. Bent Barrel
    Bent Barrel liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 11-07-2022, 11:55 AM
  3. Scout
    Scout liked post by gundoc On thread : Rechambering question for you experienced machinists
    Re-reaming can lengthen freebore with the appropriate reamer but it would have to be done by hand to avoid increasing the headspace. Such jobs require 'feel' which only comes from experience. Setting...
    Liked On: 11-07-2022, 02:50 AM
  4. timattalon
    timattalon liked post by gundoc On thread : Rechambering question for you experienced machinists
    Re-reaming can lengthen freebore with the appropriate reamer but it would have to be done by hand to avoid increasing the headspace. Such jobs require 'feel' which only comes from experience. Setting...
    Liked On: 11-07-2022, 01:27 AM
  5. caberslash
    caberslash liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 11-07-2022, 12:22 AM
  6. caberslash
    caberslash liked post by gundoc On thread : Rechambering question for you experienced machinists
    Re-reaming can lengthen freebore with the appropriate reamer but it would have to be done by hand to avoid increasing the headspace. Such jobs require 'feel' which only comes from experience. Setting...
    Liked On: 11-07-2022, 12:21 AM
  7. Moa Hunter
    Moa Hunter liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 11:59 PM
  8. Moa Hunter
    Moa Hunter liked post by gundoc On thread : Rechambering question for you experienced machinists
    Re-reaming can lengthen freebore with the appropriate reamer but it would have to be done by hand to avoid increasing the headspace. Such jobs require 'feel' which only comes from experience. Setting...
    Liked On: 10-07-2022, 11:51 PM
  9. veitnamcam
    veitnamcam liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 11:18 PM
  10. Russian 22.
    Russian 22. liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 10:42 PM
  11. rewa
    rewa liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 10:12 PM
  12. flock
    flock liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 10:07 PM
  13. m101a1
    m101a1 liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 09:36 PM
  14. Micky Duck
    Micky Duck liked post by gundoc On thread : Rechambering question for you experienced machinists
    Go to the SAAMI pages and compare the differences between maximum cartridge dimensions and minimum chamber dimensions and you will get the tolerances you need for designing chamber and loading die...
    Liked On: 10-07-2022, 09:23 PM
  15. Micky Duck
    Micky Duck liked post by gundoc On thread : Rechambering question for you experienced machinists
    Re-reaming can lengthen freebore with the appropriate reamer but it would have to be done by hand to avoid increasing the headspace. Such jobs require 'feel' which only comes from experience. Setting...
    Liked On: 10-07-2022, 09:21 PM

14-10-2015


05-09-2015


31-08-2015


06-04-2015


12-01-2015


10-01-2015


02-12-2014



No results to display...
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!