gundoc
Member

3937 Likes

Page 74 of 263 First ... 246061626364656667686970717273747576777879808182838485868788124174 ... Last

• Jump to page:

1. 
   ZQLewis liked post by gundoc On thread : Brand new Hatsan shotgun exploded in my face

   The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...

   Liked On: 25-04-2022, 01:32 AM

2. 
   Moa Hunter liked post by gundoc On thread : new barrel - hard to eject rounds

   The usual cause of such problems is a rough chamber, normally caused by trying to take too large cuts. The reamer must be withdrawn , cleaned and lubed, many times, especially when getting near the...

   Liked On: 24-04-2022, 05:57 PM

3. 
   small_caliber liked post by gundoc On thread : new barrel - hard to eject rounds

   The usual cause of such problems is a rough chamber, normally caused by trying to take too large cuts. The reamer must be withdrawn , cleaned and lubed, many times, especially when getting near the...

   Liked On: 24-04-2022, 04:08 PM

4. 
   Sideshow liked post by gundoc On thread : new barrel - hard to eject rounds

   The usual cause of such problems is a rough chamber, normally caused by trying to take too large cuts. The reamer must be withdrawn , cleaned and lubed, many times, especially when getting near the...

   Liked On: 24-04-2022, 11:19 AM

5. 
   Micky Duck liked post by gundoc On thread : new barrel - hard to eject rounds

   The usual cause of such problems is a rough chamber, normally caused by trying to take too large cuts. The reamer must be withdrawn , cleaned and lubed, many times, especially when getting near the...

   Liked On: 24-04-2022, 11:08 AM

6. 
   caberslash liked post by gundoc On thread : new barrel - hard to eject rounds

   The usual cause of such problems is a rough chamber, normally caused by trying to take too large cuts. The reamer must be withdrawn , cleaned and lubed, many times, especially when getting near the...

   Liked On: 24-04-2022, 11:04 AM

7. 
   Micky Duck liked post by gundoc On thread : ADI book max’s

   I am running ADI Benchmark 2 with the 69 grain Sierra BTHP Match in my Tikka 20" 8" twist .223 at the maximum listed load of 23.5 grains. There are no pressure signs but it is very accurate at 0.5...

   Liked On: 19-04-2022, 08:52 PM

8. 
   tetawa liked post by gundoc On thread : ADI book max’s

   I am running ADI Benchmark 2 with the 69 grain Sierra BTHP Match in my Tikka 20" 8" twist .223 at the maximum listed load of 23.5 grains. There are no pressure signs but it is very accurate at 0.5...

   Liked On: 19-04-2022, 09:05 AM

9. 
   BSA270 liked post by gundoc On thread : All things BSA

   That was a BSA factory accessory known as a 'Range Adapter'. You attached it over the muzzle brake when you were on a shooting range to avoid discomfort to other shooters from the side blast. I...

   Liked On: 13-04-2022, 10:01 PM

10. 
    Gibo liked post by gundoc On thread : Barrels and Accuracy

    Joe90 has accurately summed it up, and Longshot's suggestion of alchemy pretty much matches my own thoughts. I have often said that successful gunsmiths are also alchemists! The ability to 'create...

    Liked On: 13-04-2022, 08:46 AM

11. 
    veitnamcam liked post by gundoc On thread : All things BSA

    The BSA Sportsman rifles were good and accurate but the split rear bridge meant they had to have a side mount for a scope. They were never much good as they flexed too much. I used to fit a fixed...

    Liked On: 11-04-2022, 11:44 AM

12. 
    veitnamcam liked post by gundoc On thread : All things BSA

    This photo is BSA relevant. This is a 10 pointer I shot in Amphitheatre Creek, Avoca, in 1976. The rifle is a BSA Hunter in .308. He had a harem of 5 hinds and I had been tracking him for most of...

    Liked On: 11-04-2022, 11:39 AM

13. 
    veitnamcam liked post by gundoc On thread : All things BSA

    I got my first BSA on my 16th birthday - a 1917 BSA SMLE that was FTR'd to new condition. I eventually sporterised it after a few hunting trips in the fully wooded condition, and it shot a lot of...

    Liked On: 11-04-2022, 11:39 AM

14. 
    Cordite liked post by gundoc On thread : 308 Twist rates v projectile weights ?

    Go for the 1:12 which will handle 125 -150 grainers well. The heavier bullets are not needed where we are!

    Liked On: 09-04-2022, 11:51 PM

15. 
    Russian 22. liked post by gundoc On thread : WW2 surrendered rifles

    All of the recent refurbished K98's out of Russia came from piles like that!

    Liked On: 09-04-2022, 11:01 AM

Page 74 of 263 First ... 246061626364656667686970717273747576777879808182838485868788124174 ... Last

• Jump to page: