gundoc
Member

3899 Likes

Page 7 of 260 First 12345678910111213141516171819202157107 ... Last

• Jump to page:

1. 
   rewa liked post by gundoc On thread : My new toy - Because a man cannot have to many

   Call me old-fashioned, but I much prefer milled to moulded. I just can't bring myself to buying a gun with a plastic frame. The new manufacturing techniques are only producing guns that are almost as...

   Liked On: 24-01-2024, 10:20 PM

2. 
   19Badger liked post by gundoc On thread : 22 Hornet - Over Length Fired Once Cases?

   Case length is always going to be an ongoing problem with the .22 Hornet because the long taper on the case lends itself to stretching. The .22 K Hornet was developed to overcome the stretch problem...

   Liked On: 17-01-2024, 09:17 PM

3. 
   308 liked post by gundoc On thread : Removing front sight from margolin .22

   The Margolin front sights were a shrink fit. To remove then you need to disassemble the elevating system, hold the barrel in padded jaws, quickly heat the sight ring with a torch then tap off with a...

   Liked On: 13-01-2024, 11:49 PM

4. 
   Hugh Shields liked post by gundoc On thread : 22 Hornet - Over Length Fired Once Cases?

   Case length is always going to be an ongoing problem with the .22 Hornet because the long taper on the case lends itself to stretching. The .22 K Hornet was developed to overcome the stretch problem...

   Liked On: 13-01-2024, 04:05 PM

5. 
   blip liked post by gundoc On thread : 22 Hornet - Over Length Fired Once Cases?

   Case length is always going to be an ongoing problem with the .22 Hornet because the long taper on the case lends itself to stretching. The .22 K Hornet was developed to overcome the stretch problem...

   Liked On: 13-01-2024, 11:50 AM

6. 
   paremata liked post by gundoc On thread : Suppressing a 45/70

   Back in the early '70's I started making centrefire suppressors commercially (probably the first) and the first few were over-barrel jobs on shortened .45/70 H&R Toppers. The barrels were shortened...

   Liked On: 07-01-2024, 03:54 PM

7. 
   Dama dama liked post by gundoc On thread : Press mounting options

   The only truly successful system is the press bolted firmly to a solid bench. I have mine at the right-hand end, reasonably out of the way and it makes a useful coat and hat rack as well.

   Liked On: 02-01-2024, 08:59 PM

8. 
   techno retard liked post by gundoc On thread : Press mounting options

   The only truly successful system is the press bolted firmly to a solid bench. I have mine at the right-hand end, reasonably out of the way and it makes a useful coat and hat rack as well.

   Liked On: 31-12-2023, 01:06 PM

9. 
   Scouterkotare liked post by gundoc On thread : hmmmmmmmmmmmmm

   I see that the L1A1 in the centre of the photo has one of my A category grips and muzzle brake that I was manufacturing in the mid '90's.

   Liked On: 31-12-2023, 12:58 PM

10. 
    Barry the hunter liked post by gundoc On thread : Press mounting options

    The only truly successful system is the press bolted firmly to a solid bench. I have mine at the right-hand end, reasonably out of the way and it makes a useful coat and hat rack as well.

    Liked On: 31-12-2023, 09:33 AM

11. 
    blip liked post by gundoc On thread : CZ 527 Mauser Feed Issues.

    The model has long been known for feeding problems, however there are some reasonably easy fixes. If the round is sitting too high and contacting the top of the chamber then either the magazine feed...

    Liked On: 28-12-2023, 06:23 PM

12. 
    Husky1600#2 liked post by gundoc On thread : CZ 527 Mauser Feed Issues.

    The model has long been known for feeding problems, however there are some reasonably easy fixes. If the round is sitting too high and contacting the top of the chamber then either the magazine feed...

    Liked On: 28-12-2023, 03:41 PM

13. 
    Sharki liked post by gundoc On thread : CZ 527 Mauser Feed Issues.

    The model has long been known for feeding problems, however there are some reasonably easy fixes. If the round is sitting too high and contacting the top of the chamber then either the magazine feed...

    Liked On: 28-12-2023, 02:44 PM

14. 
    20 Bore liked post by gundoc On thread : CZ 527 Mauser Feed Issues.

    The model has long been known for feeding problems, however there are some reasonably easy fixes. If the round is sitting too high and contacting the top of the chamber then either the magazine feed...

    Liked On: 28-12-2023, 01:50 PM

15. 
    rugerman liked post by gundoc On thread : How accurate are doc boundaries

    Look on the bright side. If you can't determine your exact position relative to the legal boundaries with all the maps and GPS gear you have, then it will be very difficult for anyone to make a...

    Liked On: 26-12-2023, 08:04 AM

Page 7 of 260 First 12345678910111213141516171819202157107 ... Last

• Jump to page: