GWH
Member

5130 Likes

Page 212 of 342 First ... 112162198199200201202203204205206207208209210211212213214215216217218219220221222223224225226262312 ... Last

• Jump to page:

1. 
   PERRISCICABA liked post by GWH On thread : Federal large primers

   Fed 210's and 215's are all ive ever really used, thousands of the bloody things over the last few years, ive never had a missfire

   Liked On: 08-03-2018, 07:41 AM

2. 
   xtightg liked post by GWH On thread : My custom lone peak and my experience. 260rem

   For a mountain rifle soley used for hunting where 1 or 2 shots is normally all you'd ever get is a heavier profile barrel going to give you any benefit?

   Liked On: 07-03-2018, 12:56 PM

3. 
   The bomb liked post by GWH On thread : A quality knife at a very resonible price

   Its far too cheap for you Bruce, go to the first post mate

   Liked On: 07-03-2018, 12:28 PM

4. 
   veitnamcam liked post by GWH On thread : Federal large primers

   Fed 210's and 215's are all ive ever really used, thousands of the bloody things over the last few years, ive never had a missfire

   Liked On: 04-03-2018, 07:21 PM

5. 
   tetawa liked post by GWH On thread : Federal large primers

   Fed 210's and 215's are all ive ever really used, thousands of the bloody things over the last few years, ive never had a missfire

   Liked On: 01-03-2018, 06:33 PM

6. 
   7mmTom liked post by GWH On thread : Hi.....I'm New

   Welcome to the forum, the Hawkes Bay sure is a good spot for all of those things eh! ;-)

   Liked On: 28-02-2018, 05:45 PM

7. 
   SlimySquirrel liked post by GWH On thread : Goats & Gongs

   Cool vid, its fun getting the footage and editing them up eh. I enjoy playing with different types of footage and various editing techniques. Im enjoying playing with timelapse footage currently...

   Liked On: 28-02-2018, 05:38 PM

8. 
   llewelyn liked post by GWH On thread : 7mmSAUM powders

   In that QL data i see you have the COAL at 2.820" with a 162gr. That will be severaly reducing the powder capacity. Im running mine at a COAL of 2.965" with 67.5gr of 2217.

   Liked On: 28-02-2018, 02:24 PM

9. 
   llewelyn liked post by GWH On thread : 7mmSAUM powders

   Yep 2217 goes well with that weight range. I run a full case of 2217 with the 162 Amax and it shoots tight at 3,005 from a suppressed 22" tube.

   Liked On: 28-02-2018, 02:24 PM

10. 
    Gibo liked post by GWH On thread : Federal large primers

    Fed 210's and 215's are all ive ever really used, thousands of the bloody things over the last few years, ive never had a missfire

    Liked On: 28-02-2018, 09:22 AM

11. 
    Link liked post by GWH On thread : 7mmSAUM powders

    Yep 2217 goes well with that weight range. I run a full case of 2217 with the 162 Amax and it shoots tight at 3,005 from a suppressed 22" tube.

    Liked On: 28-02-2018, 06:56 AM

12. 
    camo wsm liked post by GWH On thread : The Latest and hopefully last 7 Saum i will own.....

    Sorry, only just seen this, yeah i seat the 162 Amax out long to just off the lands, they need to be single fed, and if i ever have to extract an unfired round i need to press the bolt release and...

    Liked On: 28-02-2018, 05:05 AM

13. 
    Shootm liked post by GWH On thread : A quality knife at a very resonible price

    Its far too cheap for you Bruce, go to the first post mate

    Liked On: 25-02-2018, 09:26 PM

14. 
    WallyR liked post by GWH On thread : Reactive targets - keeping it fun for the kids

    Yep we've done the balloon thing, with water and air. All good fun, we are just upping the anti [emoji6] Sent from my SM-G900I using Tapatalk

    Liked On: 24-02-2018, 08:19 PM

15. 
    Tahr liked post by GWH On thread : Dinner thread?

    Wild lamb with a mint, rosemary and garlic based marinade, grilled/smoked over hardwood lump charcoal. Was bloody beautiful if I don't say so myself. Got the tick of approval from the...

    Liked On: 23-02-2018, 09:04 PM

Page 212 of 342 First ... 112162198199200201202203204205206207208209210211212213214215216217218219220221222223224225226262312 ... Last

• Jump to page: