GWH
Member

4133 Likes

Page 84 of 276 First ... 347071727374757677787980818283848586878889909192939495969798134184 ... Last

• Jump to page:

1. 
   GWH liked post by Shearer On thread : 7mm sectioned projectiles

   I use the 150BTs in my 7mmRM (MV 3160fps) and have never had any issue with a lack of penetration.

   Liked On: 30-03-2020, 06:14 PM

2. 
   GWH liked post by winaa On thread : 7mm sectioned projectiles

   Following on from the 270 GK exploding thread and Flyblown comments on Pro-hunters v Gamekings. I decided to section some of my projectiles. I was always under the impression that Pro-hunters had a...

   Liked On: 30-03-2020, 04:14 PM

3. 
   GWH liked post by 257weatherby On thread : Short barrel 243

   Ran an 18" T3 with 85 Sierra hp at 3100 then switched to a dual load :95 VLD at 3000 and 95 SST at 2950. Stiff loads of 2209. All three killers on Fallow, Reds and Tahr. My current 243 is...

   Liked On: 30-03-2020, 02:53 PM

4. 
   GWH liked post by Low box On thread : 7mm08 bushpig shorty

   I run a Kimber 708 cut to 16" running Barnes 120gn TTSXs - very happy with it, drops everything it points at. I run a can on it and the total length is still short enough to be handy in the bush. ...

   Liked On: 29-03-2020, 11:09 AM

5. 
   GWH liked post by Tahr On thread : Can't be stuffed...

   I can't really be stuffed writing this but there is so much negativity around, and this being a hunting/shooting forum , I guess if there's something positive going on we should share it. So son...

   Liked On: 21-03-2020, 10:56 PM

6. 
   GWH liked post by Noswal On thread : 7mm08 and 162 Eld Ms

   Hehe. Joined to chat about that 7x64 barrel. ��*♂️ Couldn’t help myself lol

   Liked On: 18-03-2020, 09:03 AM

7. 
   GWH liked post by Kiwi Greg On thread : 18" Model Seven 223

   I got this 223 going yesterday, it has been a work in progress for a while now https://i1004.photobucket.com/albums/af161/Kiwi-Greg/IMG_5119_zpslj5euje5.jpg...

   Liked On: 06-03-2020, 04:31 PM

8. 
   GWH liked post by Tahr On thread : Pet Loads for the 7 mm SAUM Please.

   GWH is in the Bay and he has a lot of experience with this caliber.

   Liked On: 02-03-2020, 08:01 PM

9. 
   GWH liked post by Tech On thread : See separation?

   Tahr I would suggest that your cases aren't being annealed enough. Unless you have hands of steel there is no way that you can get the necks hot enough and still hold onto the case base. At one point...

   Liked On: 27-02-2020, 11:28 PM

10. 
    GWH liked post by ChrisW On thread : See separation?

    Never seen that happen after a only a couple firings. One thing I notice is that the carbon on the case appears to continue past the cartridge neck and onto the shoulder. To me this would indicate...

    Liked On: 27-02-2020, 11:26 PM

11. 
    GWH liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 27-02-2020, 03:39 PM

12. 
    GWH liked post by stug On thread : DIY Carbon Fiber Rifle Stock

    Seeing as I have stopped making them I am happy to answer any questions etc. Plug looks good though.

    Liked On: 27-02-2020, 03:36 PM

13. 
    GWH liked post by Tribrit On thread : 18" 6.5 PRC

    Iv been waiting for a 85 Carbonlight in 6.5prc. If it ever happens I'm buying one immediately. In the meantime I'm pretty close to having a prc built on a blue printed Model 7 action.

    Liked On: 17-02-2020, 10:28 PM

14. 
    GWH liked post by Tahr On thread : Short 6.5s

    If I didn't have too many rifles and not enough time left to use them all I would get a Mauser M18 in 6.5prc for $1,250, chop it to 18-20" (I would do 20"), put a dpt on it and call it my only rifle....

    Liked On: 17-02-2020, 10:24 PM

15. 
    GWH liked post by Uplandstalker On thread : The model 7 in your life

    I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...

    Liked On: 16-02-2020, 10:15 PM

Page 84 of 276 First ... 347071727374757677787980818283848586878889909192939495969798134184 ... Last

• Jump to page: