Dare I say it but that load would work just as well for the elder members of the household. My shooting is almost entirely at targets these days so more and more of my rifles have light loads for...
Liked On: 23-04-2022, 12:12 PM
100y man good for everything then
Liked On: 23-04-2022, 08:36 AM
sounds like you have it sorted...80 grns of Mr Speers finest at 2700fps is not to be sniffed at...any deer ,goat or pig is going to be in big trouble. LOVE speer projectiles,they are soft and breakup...
Liked On: 22-04-2022, 11:02 PM
DPT with extra baffles End of story
Liked On: 20-04-2022, 09:12 PM
I tried a big long centrefire suppressor and it was good with subs but still cracked with supers....if you getting crack...you going supersonic. NO suppresser will fix that.
Liked On: 20-04-2022, 09:12 PM
My new 22semi is ultra quiet running cci subs and a gunworks fat 22 suppressor, the bolt cycling is louder than any muzzle report
Liked On: 20-04-2022, 09:11 PM
Plus one for that. I just used some thin cardboard off a muesli bar or beer box last time and it has been in the quick release mount now for over 6 months no worries.
Liked On: 15-04-2022, 01:00 AM
Just shim it using some beer cans mate
Liked On: 15-04-2022, 01:00 AM
I recently acquired a used suppressor with a build up of carbon to some degree ... I was amazed how well my ultrasonic case cleaner, cleaned the carbon out... took about an hour total.... hot, with a...
Liked On: 14-04-2022, 08:29 AM
Could try Fraser at owl optics
Liked On: 13-04-2022, 06:24 PM
Red with a hint of Sika Large eye sockets and nose length of the red
Liked On: 13-04-2022, 05:06 PM
https://www.nzdahastings.org.nz/wp-content/uploads/2010/11/Withey-System-Guide-Notes.pdf Certainly looks more red then sika in its overall appearance. As others have said, look for the T or the Y...
Liked On: 13-04-2022, 02:18 PM
Thanks for the replies, always impressed with the forum knowledge! Definitely a Y shape between the coronets. 194591
Liked On: 13-04-2022, 02:18 PM
Hey, see link for our instructions Suppressor maintenance instructions - DPT Machinists (http://www.dpt.co.nz/cms.php?id_cms=7) This is a snip from the instructions. Your suppressor must be...
Liked On: 13-04-2022, 12:19 PM
Just got back from a trip with Dad, 3 huts you can drive the boat right to. The "hunters hut" plenty of dry cut firewood, some chocolates and a couple of osm bars ,a plate and a coffee mug (which...
Liked On: 13-04-2022, 10:20 AM