GWH
Member

4133 Likes

Page 26 of 276 First ... 121314151617181920212223242526272829303132333435363738394076126 ... Last

• Jump to page:

1. 
   GWH liked post by caberslash On thread : DPT tools for separating seized suppressor baffles

   A pair of these should work! https://www.bunnings.co.nz/boa-strap-lid-remover-100mm-strap-wrench_p0197239 Have used these and they do the...

   Liked On: 13-04-2022, 10:10 AM

2. 
   GWH liked post by TeRei On thread : DPT tools for separating seized suppressor baffles

   I have the DPT clamps for both MK 1 and MK 11. Do you need them?

   Liked On: 13-04-2022, 09:23 AM

3. 
   GWH liked post by Feral On thread : Begara B14 in magnum cals.

   I shoot both Howa and Bergara but my B14 is the only one I have in a magnum (300wm). I just stripped and re torqued it recently and gave it a zero. Admittedly it is only a 3 Rd group but its...

   Liked On: 12-04-2022, 11:56 PM

4. 
   GWH liked post by DPT On thread : DPT tools for separating seized suppressor baffles

   Yes. From memory we haven't had any baffles that we haven't been able to disassemble with our suppressor clamps, even suppressors that have not been maintained for years and have had thousands of...

   Liked On: 12-04-2022, 04:50 PM

5. 
   GWH liked post by MSL On thread : The $3000 gong gun

   The hotrod chamberings are pretty amazing though. My 7mm fatmax I sold in 2020, has fired less rounds now than when I sold it, so barrel life is increasing. Sent from my iPhone using Tapatalk

   Liked On: 12-04-2022, 11:29 AM

6. 
   GWH liked post by mikee On thread : The $3000 gong gun

   Buy a 300wm bergara hmr $1900 ish i believe. Stick whatever varipower scope you have lying around and you are away. Probably even have change

   Liked On: 12-04-2022, 11:29 AM

7. 
   GWH liked post by Nickoli On thread : The model 7 in your life

   I've got a 3 hole Weaver rail for a Mohawk 660 you can have - pretty sure they are the same pattern (even if you just want to check whether the 3 hole works on the newer receivers). Flick me a PM if...

   Liked On: 12-04-2022, 12:10 AM

8. 
   GWH liked post by Shamus_ On thread : The model 7 in your life

   I am pretty sure I used a 4 hole rail on a 3 hole action ages ago. EGWs specs seem to indicate that I possibly did 3.351" + 0.276" = 3.627" 194484 194485 The DMZ one piece mounts which I am...

   Liked On: 12-04-2022, 12:09 AM

9. 
   GWH liked post by BRADS On thread : The $3000 gong gun

   Whats wrong with using that as a gong gun? It'll make you a better shot on animals, recently spent a day on gongs with a fully wooded 303 and iron sights out to 1000 yards heck it was fun. Look...

   Liked On: 12-04-2022, 12:03 AM

10. 
    GWH liked post by caberslash On thread : The model 7 in your life

    Aye, you'll need to check if it's a three or four hole receiver. Mine is a three hole, only managed to find EGW who made a 20MOA 3hole picatinny rail. Special order from the USA, bit of a pain...

    Liked On: 11-04-2022, 01:55 PM

11. 
    GWH liked post by Mathias On thread : The model 7 in your life

    In terms of weight etc, factory stock it would be very similar. The Bergara has a standard Rem 700 sized action, so a little longer than M7. Berg has a much better bolt release, better selection of...

    Liked On: 11-04-2022, 01:55 PM

12. 
    GWH liked post by Tentman On thread : Remmy 7 vs Savage 16 Actions

    Hey thanks so much for doing this . . .appreciated!

    Liked On: 11-04-2022, 01:45 PM

13. 
    GWH liked post by Tentman On thread : Remmy 7 vs Savage 16 Actions

    And while your at it,will bolt with the guide cut run in an action without it (I'm trying to understand if a bolt without the guide cut can be altered to fit an action with the bolt guide) Thanks

    Liked On: 11-04-2022, 12:50 PM

14. 
    GWH liked post by bumblefoot On thread : What does your suppressed huntimg rifle weigh?

    I've got a Howa Lightweight 308, which really isn't that lightweight... What would make more difference to me when it comes to carrying a rifle is losing 20kg of fat.... :D

    Liked On: 11-04-2022, 12:43 PM

15. 
    GWH liked post by veitnamcam On thread : The $3000 gong gun

    For a gong gun I'd go a break. 3 shots and I have too much mirage with mine.

    Liked On: 11-04-2022, 11:47 AM

Page 26 of 276 First ... 121314151617181920212223242526272829303132333435363738394076126 ... Last

• Jump to page: