Hugh Shields
Member

388 Likes

Page 20 of 26 First ... 67891011121314151617181920212223242526 Last

• Jump to page:

1. 
   Hugh Shields liked post by kukuwai On thread : no hunting today

   Be getting close to +37c in some places over here today so no hunting either. Everyone is in the shade !! Sent from my SM-G950F using Tapatalk

   Liked On: 14-01-2024, 11:07 AM

2. 
   Hugh Shields liked post by bearfighter On thread : no hunting today

   minus 37c in the shade no hunting today

   Liked On: 14-01-2024, 11:07 AM

3. 
   Hugh Shields liked post by longshot On thread : 22 Hornet - Over Length Fired Once Cases?

   Re trimming, you can get an attachment to connect a battery drill to the RCBS trimmer, I will see if I can find mine tomorrow. From memory I didn't find it that great. It might be better if doing...

   Liked On: 14-01-2024, 07:39 AM

4. 
   Hugh Shields liked post by blip On thread : 22 Hornet - Over Length Fired Once Cases?

   That line back from the tip is where a thin copper jacket starts

   Liked On: 13-01-2024, 04:08 PM

5. 
   Hugh Shields liked post by blip On thread : 22 Hornet - Over Length Fired Once Cases?

   241478

   Liked On: 13-01-2024, 04:08 PM

6. 
   Hugh Shields liked post by gundoc On thread : 22 Hornet - Over Length Fired Once Cases?

   Case length is always going to be an ongoing problem with the .22 Hornet because the long taper on the case lends itself to stretching. The .22 K Hornet was developed to overcome the stretch problem...

   Liked On: 13-01-2024, 04:05 PM

7. 
   Hugh Shields liked post by rupert On thread : 22 Hornet - Over Length Fired Once Cases?

   The bullet I am using is the Sierra #1385. It is a hollow point, flat base, and has a reputation for being relatively hard (which I wanted in caae I came across a goat). I have found it to be...

   Liked On: 13-01-2024, 04:05 PM

8. 
   Hugh Shields liked post by sneeze On thread : 223 Lapua brass

   Overall weight is a poor measure of internal capacity. I cant find (be bothered looking) my old data but a quick check this morning on only a single case of each ...

   Liked On: 13-01-2024, 01:31 PM

9. 
   Hugh Shields liked post by zeropak On thread : 223 Lapua brass

   Close. I'm running the 75 and 73gn ELDM's Nosler Brass Fed 205 Primer and 25gns of 2208. This is a compressed load which I worked up to. Velocity is 2795 out of a 20" barrel in my Tikka T3x....

   Liked On: 13-01-2024, 01:27 PM

10. 
    Hugh Shields liked post by sportco62 On thread : Press mounting options

    I dont do enough loading to warrant a permanent mount so this is my current set up . It is a high bench though 240482 A tidy bench is a sign of an uncreative person

    Liked On: 13-01-2024, 09:09 AM

11. 
    Hugh Shields liked post by No.3 On thread : 22 Hornet - Over Length Fired Once Cases?

    Sounds like you need a velcro attached mesh brass catcher bag that velcro's over the ejection port and catches your empties...

    Liked On: 12-01-2024, 10:01 PM

12. 
    Hugh Shields liked post by rupert On thread : 22 Hornet - Over Length Fired Once Cases?

    I found 2207 too slow. I have been using 11.2gr of Lil Gun with a 40gr Sierra bullet and SPP for 3,100ft/sec. This was the most accurate load. After accuracy testing I checked for longevity: fired...

    Liked On: 12-01-2024, 03:01 PM

13. 
    Hugh Shields liked post by 7mmsaum On thread : 6.5 or 7mm08

    So it’s a 7 mm08 for the win :) Find yourself a nice Sako 75 and keep it 241307

    Liked On: 10-01-2024, 10:19 PM

14. 
    Hugh Shields liked post by Barry the hunter On thread : 6.5 or 7mm08

    270 Sako Finn bear and stuff all of ya long live the mighty .270

    Liked On: 10-01-2024, 09:31 PM

15. 
    Hugh Shields liked post by Brad S On thread : Your cartridge of choice.

    New to shooting, but I got a .22 and a 30-06 so far. Might get a cheap 223 at some point. Those 3 choices should cover everything I want to put in my freezer.

    Liked On: 10-01-2024, 09:10 PM

Page 20 of 26 First ... 67891011121314151617181920212223242526 Last

• Jump to page: