Hunter_Nick
Member

738 Likes

Page 35 of 50 First ... 2122232425262728293031323334353637383940414243444546474849 ... Last

• Jump to page:

1. 
   Hunter_Nick liked post by Flyblown On thread : 6mm Creedmoor vs 243

   It’s totally irrelevant though, isn’t it. This circular argument keeps coming up. Oh but what if the .243 Winchester has a 8” twist barrel. It doesn’t. No mainstream manufacturer has ever made...

   Liked On: 19-05-2022, 10:30 PM

2. 
   Hunter_Nick liked post by Mathias On thread : Sako vixen options

   6x45 all the way. I've got two on Vixens, one with an 18" barrel & the other in 23". They are both very accurate, the 18" has the edge as its a Bartlein barrel and the other TF. Wingman will tell you...

   Liked On: 19-05-2022, 08:39 AM

3. 
   Hunter_Nick liked post by john worthington On thread : Walnut stock build (done the traditional way)

   damm thats looking good

   Liked On: 17-05-2022, 09:45 PM

4. 
   Hunter_Nick liked post by 7mmsaum On thread : Rifle Bedding Opinions

   If you had a HSPrecision stock on your remington the recommended is 65 inch pounds in the front and 40 on the rear 35 to 40 on the rear suits most composite stocks. If you need to be specific...

   Liked On: 17-05-2022, 10:55 AM

5. 
   Hunter_Nick liked post by 7mmsaum On thread : Rifle Bedding Opinions

   You are 100% correct I have set up hundreds of rifle stocks using a magnetic dial indicator gauge, watching the dial during the tightening sequence tells you everything you need to know A...

   Liked On: 17-05-2022, 10:53 AM

6. 
   Hunter_Nick liked post by ANTSMAN On thread : Walnut stock build (done the traditional way)

   sexual !

   Liked On: 16-05-2022, 09:53 PM

7. 
   Hunter_Nick liked post by Ryan_Songhurst On thread : Barnes TTSX 80gr 243

   Picked up some of the 85gr TSX and got to work on them today. 45.6gr Superformance gives 3140fps from the 18.5” barrel and stellar accuracy in fact it shot under an inch all the way from 45.3gr to...

   Liked On: 16-05-2022, 06:51 PM

8. 
   Hunter_Nick liked post by viper On thread : Stock carving?

   It's a sin, I haven't seen a good one yet , don't do it.

   Liked On: 16-05-2022, 06:47 PM

9. 
   Hunter_Nick liked post by ANTSMAN On thread : BSA 243

   Hunter_Nick thats brilliant!

   Liked On: 16-05-2022, 03:00 PM

10. 
    Hunter_Nick liked post by ANTSMAN On thread : BSA 243

    196809 Sent the stock off to a forum guy to recut the chequering, so glad I did and didn't attempt it myself.

    Liked On: 14-05-2022, 11:16 PM

11. 
    Hunter_Nick liked post by Louie On thread : DIY Gun Vice

    I couldn't bring myself to spend the coin on a plastic gun vice so I whipped up this lil ripper out of some scrap bits of Rimu and car seat leather. 196752196753196754

    Liked On: 13-05-2022, 02:44 PM

12. 
    Hunter_Nick liked post by Kelton On thread : Thoughts on this rifle/deal? Remington700 7mm-08

    Can you shed some light on the RR receiver chat not the first time iv herd it iv got a 700 RR####bla bla and it shoots 1 on top of the other with 168amax it’s bloody awsome has a trigger tech trigger

    Liked On: 12-05-2022, 10:38 PM

13. 
    Hunter_Nick liked post by viper On thread : Walnut stock build (done the traditional way)

    I was looking forward to that oil going on and the stock coming alive , it didn't disappoint. Stunning.

    Liked On: 11-05-2022, 12:06 PM

14. 
    Hunter_Nick liked post by Tahr On thread : Barnes TTSX 80gr 243

    243 80 grn speer 44 grns N550 3270 fps Safe in my Browning xbolt. 20" barrel. Likely warm.

    Liked On: 09-05-2022, 09:25 PM

15. 
    Hunter_Nick liked post by jakewire On thread : Walnut stock build (done the traditional way)

    Truly a great job done there mate.

    Liked On: 07-05-2022, 06:33 PM

Page 35 of 50 First ... 2122232425262728293031323334353637383940414243444546474849 ... Last

• Jump to page: