Hunter_Nick
Member

1363 Likes

Page 70 of 91 First ... 205657585960616263646566676869707172737475767778798081828384 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   I decided with this one to try a bit of cast and cant. All my previous stocks have been straight, so this is something new. 184015 I gave it 3/16 cast-off, and 1/8” cant or toe out. Works well...

   Liked On: 22-11-2021, 07:49 AM

2. 
   Moa Hunter liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   With that done, it’s into the fun bit! Turned a blank of walnut into a garage full of shavings! 183999 Buttstock end shaped, and looking really good. Grip felt perfect, just the right...

   Liked On: 22-11-2021, 07:48 AM

3. 
   Moa Hunter liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   After the guide screw holes were drilled (very carefully) and the rough profile cut out, it was time to get inletting. Topside complete 183996 183998 The bottom metal on these BSAs is a...

   Liked On: 22-11-2021, 07:48 AM

4. 
   Frogfeatures liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   And so after 89 1/4 hours of planing, chiselling, scraping, sanding and much thinking and looking, here is what I have. This is after the first ‘base coat’ of oil, which now needs to dry a couple of...

   Liked On: 22-11-2021, 07:23 AM

5. 
   tetawa liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   And so after 89 1/4 hours of planing, chiselling, scraping, sanding and much thinking and looking, here is what I have. This is after the first ‘base coat’ of oil, which now needs to dry a couple of...

   Liked On: 22-11-2021, 06:36 AM

6. 
   tetawa liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   With that done, it’s into the fun bit! Turned a blank of walnut into a garage full of shavings! 183999 Buttstock end shaped, and looking really good. Grip felt perfect, just the right...

   Liked On: 22-11-2021, 06:33 AM

7. 
   tetawa liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   After the guide screw holes were drilled (very carefully) and the rough profile cut out, it was time to get inletting. Topside complete 183996 183998 The bottom metal on these BSAs is a...

   Liked On: 22-11-2021, 06:32 AM

8. 
   Steelisreal liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   And so after 89 1/4 hours of planing, chiselling, scraping, sanding and much thinking and looking, here is what I have. This is after the first ‘base coat’ of oil, which now needs to dry a couple of...

   Liked On: 21-11-2021, 11:50 PM

9. 
   gundoc liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

   And so after 89 1/4 hours of planing, chiselling, scraping, sanding and much thinking and looking, here is what I have. This is after the first ‘base coat’ of oil, which now needs to dry a couple of...

   Liked On: 21-11-2021, 11:07 PM

10. 
    gundoc liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

    With that done, it’s into the fun bit! Turned a blank of walnut into a garage full of shavings! 183999 Buttstock end shaped, and looking really good. Grip felt perfect, just the right...

    Liked On: 21-11-2021, 11:07 PM

11. 
    gundoc liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

    After the guide screw holes were drilled (very carefully) and the rough profile cut out, it was time to get inletting. Topside complete 183996 183998 The bottom metal on these BSAs is a...

    Liked On: 21-11-2021, 11:06 PM

12. 
    nevereadyfreddy liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

    And so after 89 1/4 hours of planing, chiselling, scraping, sanding and much thinking and looking, here is what I have. This is after the first ‘base coat’ of oil, which now needs to dry a couple of...

    Liked On: 21-11-2021, 11:05 PM

13. 
    nevereadyfreddy liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

    With that done, it’s into the fun bit! Turned a blank of walnut into a garage full of shavings! 183999 Buttstock end shaped, and looking really good. Grip felt perfect, just the right...

    Liked On: 21-11-2021, 11:02 PM

14. 
    nevereadyfreddy liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

    After the guide screw holes were drilled (very carefully) and the rough profile cut out, it was time to get inletting. Topside complete 183996 183998 The bottom metal on these BSAs is a...

    Liked On: 21-11-2021, 11:02 PM

15. 
    janleroux liked post by Hunter_Nick On thread : Walnut stock build (done the traditional way)

    And so after 89 1/4 hours of planing, chiselling, scraping, sanding and much thinking and looking, here is what I have. This is after the first ‘base coat’ of oil, which now needs to dry a couple of...

    Liked On: 21-11-2021, 10:10 PM

Page 70 of 91 First ... 205657585960616263646566676869707172737475767778798081828384 ... Last

• Jump to page: