Step twelve Creating the inlet Now that you have a hollow shell and inlet moulds, it’s time to get ready to make the inlet for real. There are a couple of prep steps before hand however. 1....
Liked On: 03-06-2021, 10:24 PM
Step fifteen Pimp it out! So now you have your stock basically done. Only thing to do now is give it some colour! I got lazy and rattle canned mine with some Matt Black Wattyl Kill Rust epoxy...
Liked On: 03-06-2021, 10:23 PM
So there you have it. As you can see, it’s an achievable task if you take your time and get your head around how each step fits in with the next. There’s a few guys around that have done one of...
Liked On: 03-06-2021, 10:22 PM
Step thirteen Mould the barrel channel We’re almost there! Now it’s time to take a mould of the barrel channel, so we can create a liner for the forend. For my stock it was a bit of a pain, as...
Liked On: 03-06-2021, 10:09 PM
Step thirteen Mould the barrel channel We’re almost there! Now it’s time to take a mould of the barrel channel, so we can create a liner for the forend. For my stock it was a bit of a pain, as...
Liked On: 03-06-2021, 09:56 PM
Step twelve Creating the inlet Now that you have a hollow shell and inlet moulds, it’s time to get ready to make the inlet for real. There are a couple of prep steps before hand however. 1....
Liked On: 03-06-2021, 09:32 PM
Step twelve Creating the inlet Now that you have a hollow shell and inlet moulds, it’s time to get ready to make the inlet for real. There are a couple of prep steps before hand however. 1....
Liked On: 03-06-2021, 09:31 PM
Tuidog there’s a chance that something might be able to be arranged..... Just moved house, so life’s a bit hectic but maybe in a wee while
Liked On: 03-06-2021, 09:29 PM
Tuidog there’s a chance that something might be able to be arranged..... Just moved house, so life’s a bit hectic but maybe in a wee while
Liked On: 03-06-2021, 04:56 PM
Step eleven Making the inlet moulds Now this bit was theoretically easy, but in practice just about broke me! I’ll get to why that was shortly. Anyway, the idea with this step is to cast a two...
Liked On: 03-06-2021, 10:22 AM
Step eleven Making the inlet moulds Now this bit was theoretically easy, but in practice just about broke me! I’ll get to why that was shortly. Anyway, the idea with this step is to cast a two...
Liked On: 03-06-2021, 07:39 AM
There’s been a number of threads on this in the past, but I thought I’d put together a ‘build along’ on how I made mine. Building a composite stock is something I’ve wanted to do for a while, and...
Liked On: 03-06-2021, 05:38 AM
Step eleven Making the inlet moulds Now this bit was theoretically easy, but in practice just about broke me! I’ll get to why that was shortly. Anyway, the idea with this step is to cast a two...
Liked On: 02-06-2021, 11:25 PM
Step 10 The big reveal! There is just something special about breaking a composite part out of a mould. I know I’m addicted to it, it never stops being exciting for me! After at least 12-18...
Liked On: 02-06-2021, 07:17 PM
Step nine Trimming and joining the halves Right, now that the two halves have been layed-up, it’s time for a bit of waiting..... What you are waiting for is for the resin in the laminate to...
Liked On: 02-06-2021, 06:43 AM