308 Norma Magnum Its like a 308,but more Awesome!
Liked On: 04-04-2020, 12:54 PM
Got to be a 300 H&H on the P14. Classic old cartridge to go with a classic action.
Liked On: 04-04-2020, 12:53 PM
I've shot a few of those in my 8 twist .223 and they shot very well. They seat deep in the case to clear the rifling so speed was low. That shouldn't be a problem in a .22-250. Grandpamac.
Liked On: 30-03-2020, 05:47 PM
I have finished the Chevy engine and now starting to reposition the spring mounts on the 10 bolt rear end after having replaced the outer bearings and seals. Another wee project is to make a tap to...
Liked On: 29-03-2020, 08:37 PM
And here it is, reassembled. 134343
Liked On: 29-03-2020, 08:36 PM
Hopefully NZF have brought some common sense into this. Some booze for relief, others smoke, others go fidhing, others go hunting, many gamble or go shopping. I know some who must go to sea and work...
Liked On: 25-03-2020, 06:34 PM
I've just finished load development with my 260, I ended up mounting a conquest dl on it, went to range/validate the drop at 400 yesterday and get velocity. It gave me a fright how easy it was using...
Liked On: 22-03-2020, 10:39 AM
I would agree at this point, I've always dialled in moa and learned that way but after 1 range session yesterday in mrad using the metric system it was pretty apparent to me anyway, how much easier...
Liked On: 22-03-2020, 10:39 AM
I use west system burnsco sell it in small amounts but im lucky enough to get small amounts from a mate who builds boats 1 pump of Resin And one pump of hardener out of his bulk containers is...
Liked On: 20-03-2020, 08:33 PM
If you had only one calibre, and it was accurate, thats what you'd use..and it would always work, because you would make it so. I have traded a few good rifles over the years, for something newer,...
Liked On: 19-03-2020, 11:03 AM
An elegant solution to keep your scope nice and low Greghttps://uploads.tapatalk-cdn.com/20200317/6359b01907655859bf72d054af98c44c.jpg Sent from my Mi A1 using Tapatalk
Liked On: 18-03-2020, 07:33 AM
Send it down to Dannevirke you won't be disappointed. 133146133147133148
Liked On: 18-03-2020, 07:23 AM
Follow this advice above from Husky 1600 above. I've done a heap of roo and deer skins over the years as per this procedure using Ledreiters kits..
Liked On: 16-03-2020, 07:06 PM
"I decided that I should be a bit more realistic and practical rather than paying too much attention to standards now promoted by so many internet users." What a great line Coote one doesn't need...
Liked On: 13-03-2020, 10:34 AM
My wife was recently invited to be a guest artist at the Edge of the World Art Exhibition at Waikawa in the Catlins. We drove down and we really enjoyed the people and the countryside. Driving...
Liked On: 13-03-2020, 10:34 AM