Thanks Guys for all the advice especially Shamus and ishoot10s the 223 is booked in and off to the Gunsmith this morning - Thanks to Mike and Dave at Reloaders! for the eyes on and getting it off to...
Liked On: 28-10-2014, 06:35 PM
I'm in Auckland so that might have to be the case. I'll send you a private message with my work address and if you let me know how much it costs i'll transfer enough money into your account to cover...
Liked On: 27-10-2014, 03:00 PM
Hi, Yes , The power steering pump will put out more presser , but in this case it is the hole in the gun drill that gives the presser. So to start things going, the gun drill is in the guide 1/16"...
Liked On: 25-10-2014, 10:35 PM
C.T you could get this SS barrel cercoated to make it look more like a blued barrel. The mod 7 barrels have a nice thin profile and would suit the 600 well I would think. You are a generous...
Liked On: 25-10-2014, 08:18 PM
I have a stainless .243 barrel here that I took off a brand new remington model 7 and will screw straight on to it. It's brand new never fired It's yours for free if you would like it.
Liked On: 25-10-2014, 08:16 PM
If your truck has the plain jane 5L it will be easy to add the turbo. If it has the later 5LE - it will be a lot more difficult to sort. Do-able but lot more expensive.
Liked On: 24-10-2014, 08:40 PM
H110/W296 are favorites and my experience with this powder is that it meets published velocities and accuracy with 125 grain projectiles has been good so far.
Liked On: 24-10-2014, 08:31 PM
Shouldn't see why not. If you're not a member and are paying to use the range, why couldn't you. The problem I have at the HL range is they rush everyone through and so you don't get a very good...
Liked On: 15-10-2014, 06:56 AM
The junction box, Chip catcher full , motor and pump, 30019300223002530028, Lots of chips, :cool:,Homebrew.357.
Liked On: 14-10-2014, 09:31 PM
I had you pegged as more of a shooter than a hunter till now ishoot10S.
Liked On: 14-10-2014, 08:28 PM
Hi, Now that I had things set up for drilling with the gun drill ready to go, had to think about the in feed rate. The drill must go in very slowly for small chips that can be flushed out with the...
Liked On: 08-10-2014, 05:52 PM
A few more pic`s. 2982929830, And all in place.2983129832, that's It.
Liked On: 08-10-2014, 05:52 PM
Heres one of my videos https://m.youtube.com/watch?v=KqTgvDA9TsU
Liked On: 06-10-2014, 09:12 AM
Up the arse end
Liked On: 05-10-2014, 06:16 PM
Here is my 25lb sportflight barnett bow ;):D:D 29736 and here is my quiver my brother (Possum Trapper) made me out of deer skin :D:D:D 29735
Liked On: 04-10-2014, 07:59 PM