Jaco Goosen
Member

593 Likes

Page 29 of 40 First ... 1516171819202122232425262728293031323334353637383940 Last

• Jump to page:

1. 
   Jaco Goosen liked post by T.FOYE On thread : Reloading novice

   Its one big learning curve mate. Just wanna throw in some key support for the 308 in that its a bigboy for power and out to 500m its in its element. That just happens to be where nearly all hunting...

   Liked On: 05-01-2022, 09:39 AM

2. 
   Jaco Goosen liked post by JLF On thread : Reloading press

   As they did not sell refill presses in Argentina, which are to my liking, I decided to make my own press. Build on a German press https://i.postimg.cc/85Kn045H/prensa-2.jpg...

   Liked On: 03-01-2022, 05:28 AM

3. 
   Jaco Goosen liked post by JLF On thread : Reloading novice

   Download online:"https://www.rcbs.com/rcbs-how-to-reload/rcbs-step-by-step-reloading.html" is excellent. For any questions, ask and I will help you. I'm not telling him to come, because we are a bit...

   Liked On: 01-01-2022, 06:30 AM

4. 
   Jaco Goosen liked post by JLF On thread : Here I hunt today ..

   I usually hunt wild boar, and on rare occasions cougars. Cougars when they kill sheep or calves,but in this field I killed only one cougar https://i.postimg.cc/d1Fph6C0/P1010784.jpg...

   Liked On: 01-01-2022, 06:29 AM

5. 
   Jaco Goosen liked post by Woody On thread : Reloading novice

   Hi Bevan. I am about 45 min south of you and happy to help. PM me if you want. This Saturday tho I will be at Te Puke rifle club for the day-- along with a bunch of other keen shooters and hunters.

   Liked On: 29-12-2021, 07:45 PM

6. 
   Jaco Goosen liked post by 55six On thread : Binos $600 or under?

   We no longer do Vortex. We were selling them to low for the NZ market and Vortex USA hired lawyers. Our recommendation is any of the UHD models by Athlon. They are now the market leading product...

   Liked On: 29-12-2021, 08:36 AM

7. 
   Jaco Goosen liked post by Pop Shot On thread : Binos $600 or under?

   +1 55six does a sharp deal on these.

   Liked On: 29-12-2021, 08:36 AM

8. 
   Jaco Goosen liked post by charliehorse On thread : Point Blank

   Headed up the bush 2 days before Xmas for an evening hunt with the calibre of all calibres at my side:thumbsup: Would probably be my last for a few weeks. Went up after dinner and was on the...

   Liked On: 28-12-2021, 02:04 PM

9. 
   Jaco Goosen liked post by 55six On thread : A short film produced with thermal camera and scope.

   The rabbits were shot at 50-100m. At the the 33 second mark there is a paddock of rabbits at around 300m. We had a strong tail wind and they didn't stick around long. The polaris scope we were using...

   Liked On: 22-12-2021, 02:04 AM

10. 
    Jaco Goosen liked post by Neil lesslie On thread : Howa 1500 bedding.

    Jaco,stug and sixtyten are correct. Jaco because he already does it this way, stug because he understands the forces acting on the action by the action screws,and sixtyten because you need clearance...

    Liked On: 19-12-2021, 07:44 AM

11. 
    Jaco Goosen liked post by dannyb On thread : Anyone keen to rent a labradar?

    To be honest I don't think its a great idea, too risky, accidents happen, and way to many dodgy people out there. Just look at the accounts on here that have recently been hacked for starters. It's...

    Liked On: 19-12-2021, 07:42 AM

12. 
    Jaco Goosen liked post by wayno On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

    I run a 30/284 and for the 30 fan i think this would be a good all rounder as with the right twist barrel you could run 130 to 180plus bullets , to suit . The 284 is a very versatile case

    Liked On: 13-11-2021, 12:37 PM

13. 
    Jaco Goosen liked post by gundoc On thread : Possible muzzle threads on .574 barrel?

    1/2"x28 TPI would be good and still leave a decent shoulder for the suppressor to contact. 9/16" and 14mm will both leave a shoulder that is too narrow to get a positive register.

    Liked On: 08-11-2021, 08:43 PM

14. 
    Jaco Goosen liked post by gundoc On thread : Ruger Ranch II Bolt face - do I have a problem?

    The bolt face damage is totally due to gas cutting by primer leakage. The bolt face could be repaired by careful TIG welding, doing just a small area at a time to avoid over-heating the bolt and...

    Liked On: 01-11-2021, 10:44 PM

15. 
    Jaco Goosen liked post by Jhon On thread : Ruger Ranch II Bolt face - do I have a problem?

    Great, thanks! That's what I needed to know.

    Liked On: 01-11-2021, 10:43 PM

Page 29 of 40 First ... 1516171819202122232425262728293031323334353637383940 Last

• Jump to page: