Jhon
Member

1211 Likes

Page 79 of 81 First ... 296566676869707172737475767778798081 Last

• Jump to page:

1. 
   Jhon liked post by carlhurley On thread : Zeroing height with a Red Dot on Rossi Puma 92

   it does not look level all the hi and low mounts do is help you to Aline your eye when resting your cheek on the stock

   Liked On: 17-03-2021, 05:58 PM

2. 
   Jhon liked post by Ftx325 On thread : Zeroing height with a Red Dot on Rossi Puma 92

   had a bushnell red dot on my 44 mag rossi with no issues at all with zeroing at 50 mtrs . Silly question but is the rail on the correct way around ? They are usually shaped to fit the barrel as it...

   Liked On: 17-03-2021, 05:58 PM

3. 
   Jhon liked post by m101a1 On thread : Zeroing height with a Red Dot on Rossi Puma 92

   Looks like a parallel base on tapered barrel so site is not in line with barrel . [wrong base I say ]

   Liked On: 17-03-2021, 05:58 PM

4. 
   Jhon liked post by Ftx325 On thread : Zeroing height with a Red Dot on Rossi Puma 92

   Found a pic of mine and if you look closely you can see rail is tapered and shaped to fit around barrel taper. This rail came from gunworks and was a good price. 162936

   Liked On: 17-03-2021, 05:57 PM

5. 
   Jhon liked post by Flyblown On thread : .222 turning back the clock

   There are two ways to look at this. 1. Be properly old school and use a simple scope and know how to use it, and what the limitations are. Oftentimes this means faster reactions to the...

   Liked On: 11-03-2021, 09:16 PM

6. 
   Jhon liked post by PeteD On thread : 7x57mm 1st effort - comments?

   A gent at the range today let me fire a few rounds through his fully wooded mauser in 7x57. What a fantastic shooting round! Very mild recoil and was able to shoot 1.5 inch groups with open sights...

   Liked On: 24-01-2021, 04:13 PM

7. 
   Jhon liked post by zimmer On thread : 7x57mm 1st effort - comments?

   Bloody fingers, my drop tube is 550 mm long not 40mm. The ones in the funnel set are too short. Made mine out of a length of copper tube. W296 is a bastard, it jammed up the rotating tube on my...

   Liked On: 18-01-2021, 02:52 AM

8. 
   Jhon liked post by RugerM77 On thread : 7x57mm 1st effort - comments?

   Very interesting read Jhon. I've been shooting the 7 x 57 since the late seventies. Started with an old Chilean M95 and have since worked my way through various rifles. Currently using Ruger M77...

   Liked On: 17-01-2021, 08:22 PM

9. 
   Jhon liked post by 257weatherby On thread : What are some of the smoothest bolt actions you have handled?

   My M12 Mauser makes the rest feel like their bolts are wrapped in sandpaper and dipped in golden syrup. And the trigger makes the rest feel like PTO hitches on an old Fergie.

   Liked On: 17-01-2021, 08:32 AM

10. 
    Jhon liked post by csmiffy On thread : Reloading press

    Nope. Dont need it for the 50cal at all. But if it's big and strong enough to handle that, my 416 and anything smaller should be fine

    Liked On: 15-01-2021, 09:04 PM

11. 
    Jhon liked post by Dicko On thread : 7x57mm 1st effort - comments?

    Jhon, that’s what I was hinting at in my earlier post. The throats are “Lovelace “ in dimension for a lot of 7mms. So load to mag length or seat to a depth of 1 caliber diamenter for the lighter...

    Liked On: 14-01-2021, 07:29 PM

12. 
    Jhon liked post by Got-ya On thread : Gunsmith recommendation for lever model 92s

    Update. Checked clearance of cartridge guides as suggested. All seems good with no tight spots. Watching the cartridges closely as they cycle, the two lugs on the bottom of the ejector are catching...

    Liked On: 13-01-2021, 05:39 PM

13. 
    Jhon liked post by bunji On thread : 7x57mm 1st effort - comments?

    "And just to clarify, you preferred magnum primers with all those powders not just the w760? " Yes it definately seemed to burn cleaner in the hot climate there & as l posted else where we were...

    Liked On: 13-01-2021, 02:47 PM

14. 
    Jhon liked post by bunji On thread : 7x57mm 1st effort - comments?

    I may have some info that helps you settle on a load . While l guided in Africa all l used was a 1969 Brno 458 Mag & a 1970 Brno 7x57 which was my favorite & used on a wide variety of different...

    Liked On: 13-01-2021, 08:06 AM

15. 
    Jhon liked post by bigbear On thread : Portable meat safe?

    If in the bush stuff fern between animal and mesh(sheet ) a good layer works a treat

    Liked On: 12-01-2021, 08:44 PM

Page 79 of 81 First ... 296566676869707172737475767778798081 Last

• Jump to page: