Deet is probably the best for sandflies but the worst for synthetic stocks.
Liked On: 21-10-2023, 08:21 PM
Not a lot of experience with most powders but these two cover a wide range. I use AR2208 for 30.06 and 223. Very versatile stuff. AR2206H - 47.0gn/3298fps/4700CUP - 50.0gn/3401fps/50200CUP ...
Liked On: 21-10-2023, 07:21 AM
760 because I've used it for the 110s and know it works great.plus it's usually available and great flow through a measure
Liked On: 20-10-2023, 01:38 PM
Pestoff wheat. Save a lot of trauma in the long run.
Liked On: 19-10-2023, 11:42 PM
Nice,Those lee whackamoke loaders make bloody good ammunition
Liked On: 19-10-2023, 09:12 AM
Try some very cheap ammo thru it,see how it goes for recoil and accurancy.Depends wether you want to shoot to 100 yds or 300yds.
Liked On: 17-10-2023, 10:00 AM
DIY scoops that can be adjusted. DIY trickler. Just an old tirch and a piece of cat arial. The base is filled with lead shot and araldute to make it stable.
Liked On: 11-10-2023, 08:57 PM
kg of BM2 is good but still down on the speeds I expected, although possibly several other reasons for that, so it's standard process, will increase powder in increments, testing pressures until it...
Liked On: 11-10-2023, 08:52 PM
I have 3 and soon to be 5, Riton Optics Red Dot scopes. I have had zero issues with them and paid more than the $99 they are currently going for. I have two 1 Tactix RRD on pistol caliber carbines...
Liked On: 11-10-2023, 08:11 AM
Hi if you are lucky you might get a good cheep and nasty one but the adj. screws are sometimes not that flash a second hand Aim point would leave them dead . regardless of what you buy...
Liked On: 10-10-2023, 07:17 PM
I took a chance on buying over 2kg of 2208 at a good price that was probably over 20yrs old, if not more. Turned out it its still good. Sometimes you get lucky.
Liked On: 10-10-2023, 07:16 PM
Or rifle blows up cause it's not what it's said to be.....
Liked On: 10-10-2023, 02:35 PM
Great thread topic. I have something similar assembled using a 5.5mm drill for a Large Rifle primer pocket gauge. When sanded down to the right amount of taper it won't seat when the primer pocket...
Liked On: 08-10-2023, 06:17 PM
234955 Great excuse why we're sitting at home while the weather's rainy and windy. The freezer could certainly do with a bit more filling but at least I'm free to go to the interesting places...
Liked On: 07-10-2023, 11:03 PM
It's best feature is a little harder to get an image of with my steam powered mobile phone But when you look down the big hole in a 500 BPE and see this, you just buy it 234862 Both my 500...
Liked On: 06-10-2023, 05:05 PM