Jit
Member

139 Likes

Page 3 of 10 First 12345678910 Last

• Jump to page:

1. 
   dannyb liked post by Jit On thread : Sako 7mm rem mag and 168vlds

   This load is .15thou off the lands. I was chasing RL26 as my current tub is getting low, but it's like unicorn shit. So back to 2217 which is consistently available in matching batch numbers.

   Liked On: 15-07-2020, 06:40 PM

2. 
   dannyb liked post by Jit On thread : Sako 7mm rem mag and 168vlds

   I found VLDs and ELDX shot to same POA. VLDs I found are fussy on seating depth ie like to pretty close the the lands but can be insanely accurate. Excluding my cold bore fouling shot, this is...

   Liked On: 15-07-2020, 01:12 PM

3. 
   Boaraxa liked post by Jit On thread : 45/70 Subsonic

   https://uploads.tapatalk-cdn.com/20180705/087bdcbfea5d2940e5c913cf4ede9382.jpg

   Liked On: 13-07-2020, 11:21 PM

4. 
   Moa Hunter liked post by Jit On thread : 300 and 7mm Blaser Magnum

   Just completing by own build in that caliber. I used to run the 300BM with 208s, fiar bit of recoil! Mine will be 24in 8.4 twist-proof research carbon barrel, Lone Peak Razor Ti action, Trigger...

   Liked On: 03-07-2020, 10:39 PM

5. 
   Micky Duck liked post by Jit On thread : Browning BLR - does anyone in NZ do good trigger jobs on them?

   My 308LT trigger was quite sweet. No Trigger tech but good enough for its intended purpose. I backed off the spring pressure, tricky but possible (made a small bent tool) then used PTFE trigger...

   Liked On: 03-07-2020, 06:22 PM

6. 
   WillB liked post by Jit On thread : Kestrel wind meter

   1200 sounds like good value given the price of the lesser Sportsman model @1k in NZ, Anyway I've ordered from the US direct and will take my chances at customs, even with GST, it should be a few...

   Liked On: 02-07-2020, 11:28 PM

7. 
   308mate liked post by Jit On thread : Browning BLR - does anyone in NZ do good trigger jobs on them?

   My 308LT trigger was quite sweet. No Trigger tech but good enough for its intended purpose. I backed off the spring pressure, tricky but possible (made a small bent tool) then used PTFE trigger...

   Liked On: 02-07-2020, 08:38 PM

8. 
   WillB liked post by Jit On thread : Browning BLR - does anyone in NZ do good trigger jobs on them?

   My 308LT trigger was quite sweet. No Trigger tech but good enough for its intended purpose. I backed off the spring pressure, tricky but possible (made a small bent tool) then used PTFE trigger...

   Liked On: 02-07-2020, 03:08 PM

9. 
   WillB liked post by Jit On thread : 300 and 7mm Blaser Magnum

   The whole magazine seems to be improved and got more of a cool factor, with its photography and layouts. This article read as a Blaser R8 advertorial but interesting none the less. Funny the standard...

   Liked On: 30-06-2020, 12:41 PM

10. 
    WillB liked post by Jit On thread : 300 and 7mm Blaser Magnum

    Just completing by own build in that caliber. I used to run the 300BM with 208s, fiar bit of recoil! Mine will be 24in 8.4 twist-proof research carbon barrel, Lone Peak Razor Ti action, Trigger...

    Liked On: 30-06-2020, 12:39 PM

11. 
    dannyb liked post by Jit On thread : 300 and 7mm Blaser Magnum

    Just completing by own build in that caliber. I used to run the 300BM with 208s, fiar bit of recoil! Mine will be 24in 8.4 twist-proof research carbon barrel, Lone Peak Razor Ti action, Trigger...

    Liked On: 29-06-2020, 10:31 PM

12. 
    Dreamer liked post by Jit On thread : 300 and 7mm Blaser Magnum

    Just completing by own build in that caliber. I used to run the 300BM with 208s, fiar bit of recoil! Mine will be 24in 8.4 twist-proof research carbon barrel, Lone Peak Razor Ti action, Trigger...

    Liked On: 22-06-2020, 04:21 PM

13. 
    Moa Hunter liked post by Jit On thread : Swarovski Thoughts

    Swaro length can be an advantage for scope position. Optics are excellent and about the same as VX5. Also unless you are going to shoot +600m the BT will work ok in most longer range calibres. ...

    Liked On: 22-06-2020, 08:24 AM

14. 
    outdoorlad liked post by Jit On thread : 300 and 7mm Blaser Magnum

    The whole magazine seems to be improved and got more of a cool factor, with its photography and layouts. This article read as a Blaser R8 advertorial but interesting none the less. Funny the standard...

    Liked On: 21-06-2020, 08:42 PM

15. 
    Gkp liked post by Jit On thread : 300 and 7mm Blaser Magnum

    The whole magazine seems to be improved and got more of a cool factor, with its photography and layouts. This article read as a Blaser R8 advertorial but interesting none the less. Funny the standard...

    Liked On: 21-06-2020, 01:26 PM

Page 3 of 10 First 12345678910 Last

• Jump to page: