johnd
Member

1513 Likes

Page 12 of 101 First 123456789101112131415161718192021222324252662 ... Last

• Jump to page:

1. 
   Floundering Around liked post by johnd On thread : Increasing case neck tension

   Be cautious if you anneal and then run them into a Lee collett die, you can get collapsed necks as the soft brass you have created sticks to the mandrel and turns the case neck inside out. Ask me how...

   Liked On: 13-12-2023, 04:20 PM

2. 
   dannyb liked post by johnd On thread : Increasing case neck tension

   Be cautious if you anneal and then run them into a Lee collett die, you can get collapsed necks as the soft brass you have created sticks to the mandrel and turns the case neck inside out. Ask me how...

   Liked On: 12-12-2023, 09:19 AM

3. 
   Puffin liked post by johnd On thread : Home made reloading tools

   Concentricity gauge on the left all made from delrin / plastic. Doubles as funnel stand when needed. 235010

   Liked On: 09-12-2023, 07:54 AM

4. 
   m101a1 liked post by johnd On thread : Beginner reloader setup

   Just a thought on measuring devices such as verniers and scales, you will pay a premium price for any tool that is related to reloading companies. The same device without the name association will...

   Liked On: 17-11-2023, 04:43 PM

5. 
   zimmer liked post by johnd On thread : Beginner reloader setup

   Just a thought on measuring devices such as verniers and scales, you will pay a premium price for any tool that is related to reloading companies. The same device without the name association will...

   Liked On: 17-11-2023, 04:25 PM

6. 
   Steelo liked post by johnd On thread : Tokoroa VS Tech Park range

   Pushing my own boat here. What about the Te Puke rifle club? We shoot most Saturdays through September to May. 300 500 and 600 yards, we have a 100 yard zero in range. We shoot on electronic...

   Liked On: 15-11-2023, 10:02 PM

7. 
   mikee liked post by johnd On thread : Tokoroa VS Tech Park range

   Pushing my own boat here. What about the Te Puke rifle club? We shoot most Saturdays through September to May. 300 500 and 600 yards, we have a 100 yard zero in range. We shoot on electronic...

   Liked On: 15-11-2023, 08:51 PM

8. 
   zimmer liked post by johnd On thread : Home made reloading tools

   Inside neck lubing and tension setting. https://youtu.be/mPhHAsYmcMg?si=C9lcpvzF_ARV8Lr8

   Liked On: 10-11-2023, 04:20 PM

9. 
   charliehorse liked post by johnd On thread : Neck tension

   zimmer thanks, yes I have done the home brew neolube, i used Bunnings isopropyl that stays wet for a bit longer before flash off, but i think that the liquid was running the lube off into the tray....

   Liked On: 10-11-2023, 04:12 PM

10. 
    zimmer liked post by johnd On thread : Neck tension

    https://youtu.be/mPhHAsYmcMg?si=d-cToI0u2x_Gsdsv

    Liked On: 10-11-2023, 03:38 PM

11. 
    outdoorlad liked post by johnd On thread : Opinel folding knives

    If only Bacho made a folder....we could have a 50 page thread �� ��

    Liked On: 09-11-2023, 10:10 AM

12. 
    Shamus_ liked post by johnd On thread : Chrono thoughts

    Magnetospeed are pretty reliable, sure you have the issue of it being attached to rifle,. But how bigger string do you need to get an idea of the velocity.

    Liked On: 09-11-2023, 09:28 AM

13. 
    Micky Duck liked post by johnd On thread : Opinel folding knives

    Mickey, I cut myself badly with a folder once, trying to push newspaper into the window rubber, in a ships crane to block out the sun. Had to radio up and let them know I was climbing down for the...

    Liked On: 07-11-2023, 08:09 PM

14. 
    zimmer liked post by johnd On thread : Opinel folding knives

    If only Bacho made a folder....we could have a 50 page thread �� ��

    Liked On: 07-11-2023, 07:56 PM

15. 
    Micky Duck liked post by johnd On thread : Opinel folding knives

    If only Bacho made a folder....we could have a 50 page thread �� ��

    Liked On: 07-11-2023, 07:41 PM

Page 12 of 101 First 123456789101112131415161718192021222324252662 ... Last

• Jump to page: