johnd
Member

1403 Likes

Page 10 of 94 First 12345678910111213141516171819202122232460 ... Last

• Jump to page:

1. 
   Micky Duck liked post by johnd On thread : Full length sizing and head space

   You can also take the decapping pin off most dies so you could leave the primer in the case if you're going to resize the case again.

   Liked On: 07-08-2023, 05:01 PM

2. 
   Micky Duck liked post by johnd On thread : 000 in 12ga

   I have even had 000 in 2 1/2 inch shells I think it was the Polish stuff. Maybe it was called boar? I used it in a IPSC match cause i could get an extra round in. IIRC it was 12 balls as...

   Liked On: 06-08-2023, 08:04 PM

3. 
   grandpamac liked post by johnd On thread : 303

   Yeah this turned up on my fb feed. As soon as he said American design I thought misinformed twat and scrolled on by.

   Liked On: 06-08-2023, 05:07 PM

4. 
   6x47 liked post by johnd On thread : Cold smoker experiences

   Yep its called a lane smoker, best tip for sawdust is to cook it in the microwave for 5 mins before use .... seems to dry off any accumulated moisture in the saw dust. I cut grooves with a drop saw...

   Liked On: 06-08-2023, 09:50 AM

5. 
   Micky Duck liked post by johnd On thread : The price of meat these days is a joke.

   The local P and S shops around here (BOP) usually sell lamb legs with the chump off. It gets down do about $12 / kg They also sell whole cuts at goodish prices of beef. I wait untill it gets low (...

   Liked On: 05-08-2023, 06:04 PM

6. 
   Moa Hunter liked post by johnd On thread : Lanolin Oil

   Don't be confusing beaver grease with saliva Maca49

   Liked On: 04-08-2023, 08:39 PM

7. 
   Micky Duck liked post by johnd On thread : MEPLAT TRIMMING

   Yes definitely something simple would be best. It's not a game changer if it doesn't happen.

   Liked On: 27-07-2023, 05:46 PM

8. 
   Micky Duck liked post by johnd On thread : MEPLAT TRIMMING

   Yes MD I would most likely have gone that route but i have 6 weeks of no touchy ground on my leg so not going to risk a topple in the workshop. One of those tasks i should have done before the lay up...

   Liked On: 27-07-2023, 03:56 PM

9. 
   Moa Hunter liked post by johnd On thread : MEPLAT TRIMMING

   Yes you can have 2700mg a day. I've been up at 1800 but my driving suffered. Not a good look for an airline pilot.

   Liked On: 26-07-2023, 04:50 PM

10. 
    shananah liked post by johnd On thread : MEPLAT TRIMMING

    I thought I was doing good in the hilarity steaks. Big doses of Gabapentin and Tramadol....everything is smiles.

    Liked On: 24-07-2023, 09:52 PM

11. 
    Micky Duck liked post by johnd On thread : MEPLAT TRIMMING

    I thought I was doing good in the hilarity steaks. Big doses of Gabapentin and Tramadol....everything is smiles.

    Liked On: 23-07-2023, 07:46 PM

12. 
    7mmsaum liked post by johnd On thread : MEPLAT TRIMMING

    I thought I was doing good in the hilarity steaks. Big doses of Gabapentin and Tramadol....everything is smiles.

    Liked On: 23-07-2023, 07:09 PM

13. 
    zimmer liked post by johnd On thread : Making case lube

    Although I supplied the info on ratios, I am in the imperial wax camp. As a target shooter I run hundreds of cases through the sizer. I reckon one large tin would do 5000 cases. I do neck lubeing...

    Liked On: 21-07-2023, 06:25 PM

14. 
    Micky Duck liked post by johnd On thread : Making case lube

    blip ratio is 12 parts iso to 1 part Lanolin. Use 99% Iso if possible.

    Liked On: 21-07-2023, 10:54 AM

15. 
    Micky Duck liked post by johnd On thread : Worthwhile watch

    Thanks for alerting us to this guy and his mate. Just watched the one where he sneaks up on the Thar and gives it a fright. Oh the exuberance of youth! Great to see ethics and decisions not to...

    Liked On: 14-07-2023, 12:30 PM

Page 10 of 94 First 12345678910111213141516171819202122232460 ... Last

• Jump to page: