K95
Member

971 Likes

Page 56 of 65 First ... 6424344454647484950515253545556575859606162636465 Last

• Jump to page:

1. 
   nor-west liked post by K95 On thread : 6.5 Swede loads

   My 130gr swift load out of the little single shot is doing pretty much bang on 2600 after checking at range. Dribbling out the barrel compared to what others get but it's at max safe pressure,...

   Liked On: 21-08-2014, 02:28 PM

2. 
   veitnamcam liked post by K95 On thread : 6.5 Swede loads

   My 130gr swift load out of the little single shot is doing pretty much bang on 2600 after checking at range. Dribbling out the barrel compared to what others get but it's at max safe pressure,...

   Liked On: 21-08-2014, 06:08 AM

3. 
   mikee liked post by K95 On thread : 6.5 Swede loads

   My 130gr swift load out of the little single shot is doing pretty much bang on 2600 after checking at range. Dribbling out the barrel compared to what others get but it's at max safe pressure,...

   Liked On: 20-08-2014, 08:57 PM

4. 
   Toby liked post by K95 On thread : 6.5 Swede loads

   My 130gr swift load out of the little single shot is doing pretty much bang on 2600 after checking at range. Dribbling out the barrel compared to what others get but it's at max safe pressure,...

   Liked On: 20-08-2014, 08:46 PM

5. 
   Uplandstalker liked post by K95 On thread : Pressure / barrel speeds?

   Pressure is when you kick open the bolt, the primer falls out of the oval pocket and part of your bolt is gone. https://farm4.staticflickr.com/3845/14728087157_fdfd52e72c_z.jpg...

   Liked On: 15-08-2014, 09:22 AM

6. 
   Gibo liked post by K95 On thread : Pressure / barrel speeds?

   Pressure is when you kick open the bolt, the primer falls out of the oval pocket and part of your bolt is gone. https://farm4.staticflickr.com/3845/14728087157_fdfd52e72c_z.jpg...

   Liked On: 14-08-2014, 10:02 PM

7. 
   tui_man2 liked post by K95 On thread : Pressure / barrel speeds?

   Pressure is when you kick open the bolt, the primer falls out of the oval pocket and part of your bolt is gone. https://farm4.staticflickr.com/3845/14728087157_fdfd52e72c_z.jpg...

   Liked On: 14-08-2014, 09:57 PM

8. 
   Toby liked post by K95 On thread : Pressure / barrel speeds?

   Pressure is when you kick open the bolt, the primer falls out of the oval pocket and part of your bolt is gone. https://farm4.staticflickr.com/3845/14728087157_fdfd52e72c_z.jpg...

   Liked On: 14-08-2014, 09:53 PM

9. 
   veitnamcam liked post by K95 On thread : Applied Ballistics for IOS

   That was it. .508 as G7 for some reason. Legend, cheers. I must have changed it to G7 thinking Litz app would have his G7 value...

   Liked On: 10-08-2014, 10:10 AM

10. 
    PERRISCICABA liked post by K95 On thread : Applied Ballistics for IOS

    Paid for it. The inputs are correct. 2975fps mv, 155 Lapua Scenar G7, atmosphere etc all standard values, no angle.

    Liked On: 10-08-2014, 08:56 AM

11. 
    Gunzrrr liked post by K95 On thread : Gun Porn, show off your new toys

    Not blooded yet....but I did shoot quite a nice rock behind quite a nice chamois buck with it. https://farm6.staticflickr.com/5072/14413452781_5c81f9728e_z.jpg...

    Liked On: 26-06-2014, 06:23 PM

12. 
    mikee liked post by K95 On thread : Scope vs scope ideas please

    56mm objective.... And being a nightforce it will be heavy and bulky. There's more suitable options.

    Liked On: 22-06-2014, 05:39 PM

13. 
    steven liked post by K95 On thread : Brass prices

    Don't use lapua brass as a straight substitute for Winchester brass.....especially if you're running a load that has loosened the pockets after three firings.....drop back and work up again.

    Liked On: 20-06-2014, 12:01 PM

14. 
    Shearer liked post by K95 On thread : Photos your proud of -not just hunting

    Looking for chams https://farm6.staticflickr.com/5157/14156199125_a8633c7160_z.jpg (https://www.flickr.com/photos/102578758@N06/14156199125/) P1010502...

    Liked On: 20-06-2014, 09:08 AM

15. 
    Toby liked post by K95 On thread : Brass prices

    Don't use lapua brass as a straight substitute for Winchester brass.....especially if you're running a load that has loosened the pockets after three firings.....drop back and work up again.

    Liked On: 18-06-2014, 08:38 AM

Page 56 of 65 First ... 6424344454647484950515253545556575859606162636465 Last

• Jump to page: