I went out for a hunt again tonight to the usual spot where I have been picking off a couple of pigs. So I started heading to my spot, I had to take a wide birth as there was a screaming wind up...
Liked On: 26-02-2022, 01:51 PM
Do a drop test and let Strelok work the velocity out for you.
Liked On: 25-02-2022, 08:26 AM
I would have said 69.5-70.5 is where you look to have the most consistent grouping, if you overlaid targets from that charge range it looks like they would largely fall in same sort of places
Liked On: 22-02-2022, 09:29 PM
if you are getting heavy copper fouling after only 10 - 12 rounds then apart from removing the Cu with a quality solvent (I use Boretech Eliminator, and KG12 is very good too but does not show the...
Liked On: 22-02-2022, 09:28 PM
Haven 't used them for brass, though that is a great suggestion. I've used them for projectiles, somewhere between 18,000 to 20,000 over 4 years. Great company to deal with. Had a shipment...
Liked On: 18-02-2022, 09:04 PM
In the comments section of the powder shipment post, they say the Hornady shipment is hopefully arriving 10th March.
Liked On: 18-02-2022, 04:52 AM
This is what annoys me about 22lr my PCP pisses all over it .190374
Liked On: 17-02-2022, 06:03 AM
Access to shoot them on some of that private land is also a problem.
Liked On: 13-02-2022, 07:30 PM
It’s worth mentioning, for anyones benefit reading the thread that was unaware that the ammonia in Brasso polish roots brass cartridges making them prematurely brittle.
Liked On: 11-02-2022, 07:12 AM
Hey guys, I'm looking at importing a fluted titanium bolt handle for my recently re aquired semi custom sako a7 270wsm. Unfortunately no one in New Zealand manufacturers them or imports them. I...
Liked On: 10-02-2022, 10:05 AM
Happy day's I received these in the courier today and every one looks perfect. The shoot and perform perfect. Thanks Bryan189296189297 Sent from my CPH2145 using Tapatalk
Liked On: 03-02-2022, 10:22 AM
Hi there, thank you for the nice comments on my bullets. I try to make the best bullets I can so its nice to get good feedback. The 6.5mm are still happening but I am at the mercy of the die makers...
Liked On: 03-02-2022, 10:18 AM
Good morning. I'm new to the forum, although I initially missed this introduction step and I've posted a question here before. I got lots of great advice from members. I'm a bit of a late stage...
Liked On: 01-02-2022, 10:01 AM
Thanks Trout, yep a real cracker. Never come across a bigger stag before, and doubt I will in the future either. Once in a life time experience. Unofficially it’s measuring around 380DS, not an...
Liked On: 30-01-2022, 07:23 AM
Buy a .308 (From a 7mm08 owner)
Liked On: 28-01-2022, 08:47 AM