keengunNic
Member

387 Likes

Page 7 of 26 First 123456789101112131415161718192021 ... Last

• Jump to page:

1. 
   keengunNic liked post by Moa Hunter On thread : Cartridge advice 2.0 - the 7mm version

   I would bide my time and buy a 7 saum second hand when one comes up. I have not owned one, but looking at the same sort of options as yourself for a while, the Saum is the best pick for performance /...

   Liked On: 19-05-2022, 11:09 AM

2. 
   keengunNic liked post by dannyb On thread : 7mm08 120 gn barnes TTSX

   I have a short barrel on my newest project and a slow heavy for caliber pill still beats a light fast one imo I have do e a lot of number crunching and unless the recoil bothers you I would suggest...

   Liked On: 19-05-2022, 06:49 AM

3. 
   keengunNic liked post by Mooseman On thread : 270 loads

   Yep 57grs of Superformance with the 145 gr ELDX, accurate and good on deer. SF is temperature sensitive so caution is needed if loading in winter then using the same loads in summer might cause...

   Liked On: 18-05-2022, 07:10 PM

4. 
   keengunNic liked post by Cigar On thread : Swap 2208 for 2209

   Is that the guy wanting $180 for 500g and $280 for 1kg?...Nope, he's from Canterbury, hope he gets stuck with the lot and has no use for it and ends up selling below cost.

   Liked On: 17-05-2022, 02:10 PM

5. 
   keengunNic liked post by Rated M for Magnum On thread : 6mm Creedmoor vs 243

   What model? I haven't looked very hard at the Remingtons

   Liked On: 16-05-2022, 11:42 PM

6. 
   keengunNic liked post by Rated M for Magnum On thread : 6mm Creedmoor vs 243

   Yeah I get what you're saying, but do I need to get the most out of it? Probably not. From what people are saying, the 243 will do what I want to the range I want with a 10 twist.

   Liked On: 16-05-2022, 11:40 PM

7. 
   keengunNic liked post by Tahr On thread : 6mm Creedmoor vs 243

   I heard about a 6.5 Creedmoor owner who left it on her car seat with the door locked. Someone broke in and left 3 more with it. :) :)

   Liked On: 16-05-2022, 09:55 PM

8. 
   keengunNic liked post by MB On thread : Police called out for Duck shooting

   Sadly, we'll see more of this kind of stuff as society moves away from guns and hunting.

   Liked On: 16-05-2022, 05:30 PM

9. 
   keengunNic liked post by dannyb On thread : RCBS 3 way cutter

   The lee tool is shit.....well the inner outer chamfer cutter is anyway

   Liked On: 15-05-2022, 10:19 AM

10. 
    keengunNic liked post by Philipo On thread : Forum CCS donation aka The Toby Fund

    Hey all, I know that there hasn't been much done with this over the past few months ( have been busy with other things like poxy work etc ) I also realise plenty on here won't know the history or...

    Liked On: 14-05-2022, 10:36 PM

11. 
    keengunNic liked post by andyanimal31 On thread : Ballistic data for hunting applications

    If your serious buy a kestrel and applied ballistics or your just fucking around. Sent from my SM-A226B using Tapatalk

    Liked On: 14-05-2022, 12:38 AM

12. 
    keengunNic liked post by PerazziSC3 On thread : Carbon Tripod

    196154

    Liked On: 10-05-2022, 10:48 PM

13. 
    keengunNic liked post by Intrepid On thread : Permit to import a scope

    After talking to NZ Customs today via phone I can confirm that it is still legal to import a scope without a permit, either in the post or in your luggage. There was a time when a permit was...

    Liked On: 08-05-2022, 10:41 AM

14. 
    keengunNic liked post by SIX5ENZD On thread : Tikka Carbon Fiber Stock

    Looks like the general consensus is Hi Tech. Thanks for all the feed back fellas.

    Liked On: 06-05-2022, 06:05 PM

15. 
    keengunNic liked post by Fssprecision On thread : 22LR smoothbore for shot shells

    Yes I did exactly that about a month a go for a mate. He got some tube from China, it was very well finished and I think with 4.5mm bore, I cut the barrel off off a 22 Rossi and back bored to just...

    Liked On: 05-05-2022, 08:50 PM

Page 7 of 26 First 123456789101112131415161718192021 ... Last

• Jump to page: